The production line for road edge stones typically involves the
following steps:
1.Raw Material Preparation: The process begins with the preparation
of raw materials. The main components of road edge stones are
usually concrete or natural stone aggregates. These materials are
carefully selected and mixed with cement, water, and additives (if
required) to form a workable mixture.
2.Molding: The prepared mixture is poured into molds or forms that
are specifically designed to shape the road edge stones. The molds
can be made of metal, fiberglass, or other materials, and they are
usually reinforced to withstand the pressure and vibration during
the production process. The mixture is poured into the molds and
compacted to ensure proper density and strength.
3.Curing: Once the molds are filled, the road edge stones are left
to cure and harden. This can be done through a process called air
curing, where the stones are exposed to air and allowed to
naturally gain strength over time. Alternatively, accelerated
curing methods, such as steam curing or the use of curing chambers,
may be employed to reduce the curing time.
4.Demolding: After the curing process is complete, the molds are
removed, and the newly formed road edge stones are demolded. This
step requires care to ensure that the stones are not damaged during
the demolding process.
5.Surface Finishing: Depending on the desired appearance and
functionality of the road edge stones, additional surface finishing
may be performed. This can include processes such as grinding,
polishing, or applying textured finishes to enhance the aesthetic
appeal and improve slip resistance.
6.Quality Control: Before packaging and distribution, the road edge
stones undergo a quality control process. Each stone is inspected
for defects, including cracks, chipping, or irregularities in shape
and size. Strength and durability tests may also be conducted to
ensure that the stones meet the required standards.
7.Packaging and Distribution: The final step involves packaging the
road edge stones for transportation and distribution to
construction sites. They are typically stacked on pallets or
packaged in crates to facilitate easy handling and prevent damage
during transit.
| Name | Model | Specification | Size(mm) | Power(Kw) | Capacity(m2/day) | Weight(Kg) |
| Wet Cast Machinery | HTX-P-01 | Hydraulic driving;Auto feeding; vibrating and timing feeding | 7000*1000*1800 | 12.7 | 1000-1500 | 2000 |
| Wet Cast Machinery | HTX-P-02 | Chain drived;Auto feeding,auto vibration | 8000*1100*1600 | 4.05 | 800-1000 | 1500
|
Applications
Wet cast machinery, is suitable for different silicone molds,
rubber molds and plastic molds, size range from 200*200mm to
1500*1500mm, available for producing the artificial stone both for
paving tile molds, 3D wall molds, wall panel molds, roadside stone
molds, retaining wall molds, wall cap molds, etc.
Support and Services
Wet Cast Machinery technical support and services include:
- On-site technical support and maintenance
- Expert assistance with installation and setup
- Remote and telephone troubleshooting and support
- Periodic maintenance and inspection
- Repair and replacement parts
- Technical training and user manuals
- Upgrades and software updates
