Goyen Type CA25FS 1'' Flange Dust Collector System Pulse Jet Valve
Our Goyen type dust collector pulse jet valves have been specially
designed for use in dust collector systems. The high-flow
fast-opening 2-way valves are used for pulsing large volumes of air
into filter bags for particulate removal. The valve offers
extremely high flow, simple installation, and easy maintenance. In
operation, a unique flow path results in a large per-pulse volume.
YouTube video of CA25FS Goyen Replacement Nitrile Diaphragm Valve:
Technical parameter of Goyen Type FS Series Flanged Dust Collector
Valves:
| Model No. | CA25FS | CA45FS |
| Operating Pressure | 0.3~0.8MPa |
| Environment Temperature | -5~+55℃ |
| Relative Humidity | ≤ 85% |
| Fluid | Compressed air |
| Voltages | AC24V, AC110V, AC220V, DC12V, DC24V |
| Membrane Lifes | More than one million times |
| Orifice Diameter | φ25mm | φ45mm |
| Nominal Port Sizes | G1" | G1-1/2'' |
Main dimension of 1'' CA25FS Goyen Replacement Pulse Jet Valve:
Detail pictures of CA25FS Dust Collector Pulse Valve With Flange
Port:
Dust pulse valve injection cycle and air bag volume calculation
method:
The blowing cycle of the dusting pulse valve: the length of the
blowing cycle of the dusting pulse valve directly affects the
pressure drop of the dust collector. For the pulse bag type dust
collector with timing control, after the injection cycle is set, it
is periodically blown (ie, the pulse controller is turned on). By
adjusting the pulse period, the dust collector can be operated with
the pressure drop substantially stable. The blowing cycle should be
extended as much as possible without affecting the normal operation
of the precipitator. This not only reduces the compressed air
consumption, but also extends the life of the pulse valve diaphragm
and the dust bag. The blowing cycle also affects the power
consumption, the blowing cycle is short, the compressed air
consumption is large, the power consumption is also increased, the
blowing cycle is extended, and the power consumption of the blowing
system is small, but the pressure drop of the dust collector is
also increased. Will increase the power consumption of the
filtration system. Therefore, whether the total power consumption
is saved must be fully considered, and the injection cycle of the
pulse valve should be adjusted according to different operating
parameters.
Dust pulse valve air bag volume calculation method: For example, if
the dust pulse valve air bag length is 5 meters, diameter 40cm,
volume is radius * radius * π * length, which is 0.2 * 0.2 * 3.14 *
5 = 0.628 cubic meters = 628 liters (for the volume of the air bag,
in the natural atmosphere), 1 liter is equal to 0.001 cubic meters.
We also provide related repair parts such as diaphragms, coils,
etc. without the provision of pulse valve products. If you have any
questions about dust removal, please let us know and we will give
you a solution that will help you.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
