SMD LED PCB Board Aluminum LED PCB, SMD LED PCB Circuit Board
Product introduction:
We adopt Aluminum printed circuit board with high thermal
conductivity, which allows better thermal conductivity.
Combining electrical insulation and mechanical processing
performance enable the final product with better heat
dissipation and longer life span. We have developed more than 100
boards so far, which can save you a lot of
money on custom molds
Model Number: | ZYX-21754GU | Place of Origin: | Shenzhen, China |
Type: | LED light PCBA | Brand Name: | BQZYX+ |
Supplier Type: | LED LIGHT MODULE | Power: | 100W |
Material: | High quality Aluminum1060 | Input Voltage: | DC48V |
Input Voltage: | DC48V | LED CHIPS: | LUMILEDS 3030 2D |
LUMINOUS FLUX: | 130lm/w | LED Copper: | 1 oz / 35 miu
|
Thermal Conductive: | 1.5W/m.K | High Voltage resistor: | 2000V |
Digital Control (CNC) V-cut precision cutting is adopted. The
finish degree is high for processing V-shape groove surface,
no burr, no flashing, It significantly improves the product
quality, and makes it much easier to
We only use environmental friendly and 6337 solder paste. The LED
surface is bright and clean, stick firmly.
High precision SMT equipment ensures the LED chips in order and
neat.
Specification
Name | PCBA |
Layer counts | 2-30 |
Material | FR-4 , High-frequency , Cu-base , Al-base |
Maximum Size | 500mm X1100mm |
Board Outline Tolerance | ±0.13mm |
Board Thickness | 0.20mm--6.00mm |
Thickness Tolerance ( t≥0.8mm) | ±8% |
Thickness Tolerance ( t ＜ 0.8mm) | ±0.08mm |
Insulation Layer Thickness | 0.075mm--5.00mm |
Min Line | 0.075mm |
Min Space | 0.075mm |
Outer Copper Thickness | 35um--420um |
Inner Copper Thickness | 17um--210um |
Drill Hole (Mechanical) | 0.15mm--6.35mm |
Finish Hole (Mechanical) | 0.10mm--6.30mm |
Diameter Tolerance (Mechanical) | 0.075mm |
Registration (Mechanical) | 0.05mm |
Aspect Ratio | 13:1 |
Solder Mask Type | LPI |
Min Soldermask Bridge | 0.08mm |
Min Soldermask Clearance | 0.05mm |
Plug Hole Diameter | 0.25mm--0.60mm |
Impedance Control Tolerance | ±10% |
Surface Finish | HASL,LF-HASL,ENIG,Imm Tin,Imm Ag,OSP, Gold Finger |
Q. What service can you supply ?
ZYX are OEM PCB and PCBA manufacturer since 2010 ,we can provide
turnkey solutionincluding RD PCB fabrication,SMT and assembly PCBA
inside the enclosure,Functiontesting and other value-added service.
Q. What file you need to prepare if you want to get an quotation
from us?
For PCB board, you need to prepare files of Gerber file,it should
including RS-274X,ODB++, DXF, PCB, PCBDOC etc formats.
For PCBA(PCB with soldered components), except the file for PCB,
you also need to prepare the BOM list (components list), Pick and
Place file(txt format), real sample pictureor 3D PDF version file
etc.
Q. Do you have any MOQ Limited ?
We havent any limited about MOQ .Sample and mass production all can
support.
Q. How to keep our product information and design file secret ?
We are willing to sign a NDA effect by customers side local law and
promising tokeep customers data in high confidential level.
Q. How long does it take for PCB and PCBA Quote ?
PCBs quotation within 2 hours can finished the PCBA depend on the
components
quantity,if simple, within 6 hours can finished,once complex and
more,the 12- 36 hours
can be finished.
*Please note that the following detail will speed up evaluation:
Material:
Board thickness:
Copper thickness:
Surface finish:
Solder mask color:
Silkscreen color:
Q. How about the delivery?
Normally, for sample order, our delivery is about 5 days.For small
batch, our delivery is about 7 days.
For mass production batch, our delivery is about 10 days.
But that depends on the real condition when we get your order.
If your order is urgently please contact us directly ,we will
priority to deal it and do ourbest to give you satisfied delivery
time.
Q. How can we guarantee you receive an good quality product?
For PCB, we will use Flying Probe Test, E-test etc. for it.
For PCBA, we need you to offer us a method or test fixture for the
function test.Before that, our inspectors will use microscope and
X-ray to check the IC footwelding or bad solder etc.
