Crack Control Bitumen Coated Self Adhesive Reinforcement Geogrid 100x5.95m

China Vietnam Road Construction Asphalt Layer Reinforcement Crack Control Bitumen Coated Self Adhsive Fiberglass Geogrid

Glass Fiber Geogrid Introduction

There are several kinds of geogrids, of which glass fiber grille is commonly used. There are layers of asphalt on the surface of glass fiber grille, which is high temperature resistant, anti-aging and corrosion resistant. Asphalt concrete pavement is widely used in highway construction in China. However, the load stress will cause serious damage to the asphalt concrete pavement and shorten the service life of the highway.
Therefore, in order to improve the quality of asphalt concrete pavement, measures should be taken to improve its stability. For example, by increasing the application of geogrid, the quality of asphalt concrete pavement can be effectively improved.

Glass Fiber Geogrid Specification:

Glass Fiber Geogrid Features:

Glass fiber geogrid
1) High tensile strength and low elongation - glass fiber geogrid is made of glass fiber, which has high deformation resistance, and the fracture elongation is less than 3%.
2) No long-term creep - as a reinforcing material, it has the ability to resist deformation under long-term load, that is, creep resistance is very important. Glass fiber will not creep, which ensures that the product can maintain its performance for a long time.
3) Thermal stability - the melting temperature of glass fiber is above 1000 ℃, which ensures the thermal stability of glass fiber geogrid during paving operation.
4) Compatibility with asphalt mixture - the materials coated by glass fiber geogrid in the post-treatment process are designed for asphalt mixture. Each fiber is fully coated and has high compatibility with asphalt, so as to ensure that glass fiber geogrid will not be isolated from asphalt mixture in the asphalt layer, but firmly bonded together.
5) Physicochemical stability - after coating with special post-treatment agent, glass fiber geogrid can resist all kinds of physical wear and chemical erosion, biological erosion and climate change, so as to ensure its performance is not affected.
6) Aggregate interlocking and limitation - because the glass fiber geogrid is a network structure, the aggregate in asphalt concrete can penetrate it, which forms a mechanical interlocking. This restriction hinders the movement of aggregate, so that asphalt mixture can achieve better compaction state, higher bearing capacity, better load transfer performance and less deformation under load.

Glass Fiber Geogrid Application:

Product use
1. The old asphalt concrete pavement shall be reinforced to strengthen the asphalt surface course and prevent diseases.
2. Cement concrete pavement is reconstructed into composite pavement to restrain reflection cracks caused by plate shrinkage.
3. Road expansion and reconstruction project to prevent cracks caused by new and old joint and uneven settlement.
4. The reinforcement treatment of soft soil foundation is conducive to the water precipitation and consolidation of soft soil, effectively inhibit settlement, uniform stress distribution and enhance the overall strength of subgrade.
5. The semi-rigid base course of the new road will produce shrinkage cracks, and the reinforcement will be strengthened to prevent the pavement cracks caused by the reflection of foundation cracks

Construction method Glass Fiber Geogrid

1. Preparation:

Complete all joint filling, pit filling, foundation reinforcement and leveling layer laying.

2. Road surface condition

The road surface must be clean and dry with a temperature between 5 ℃ and 60 ℃.

3. Product preparation

The self-adhesive glass fiber geogrid shall not be kept in a dry environment to maintain its viscosity at the construction site.

Welcome to contact.

Leo

Manager of Hengquan company

Phone/Whatsapp/Wechat: +8615030705799

Anping County Hengquan Metal Wire Mesh Products Co.,Ltd established in 2013, has specialized in the production and marketing of geogrids, geotextiles, geocells, geomembrane, chain link, welded wire mesh panel, hexagonal wire netting. The company now has a staff of 150 and 18 sets of professional high-tech equipment for geosynthetics and wire mesh production.

Hengquan company takes integrity and innovation as its core development philosophy. With 8 Years of experience, we have passed ISO9001:2000,ISO14000 :2000,CE,TUV, 90 ,Western Europe, Central America. Meanwhile, has built its reputation on a commitment to provide high-quality products and efficient services for its global clients.