Turnkey Solution for Bitcoin Mining Cooling System, Dry Cooler
Immersion Cooling
What's Immersion Cooling?
Also known as liquid submersion cooling. It is the practice of
submerging computer components (or full servers) in a thermally,
but not electrically, conductive liquid (dielectric coolant)
allowing higher heat transfer performance than air and many other
benefits.
Immersion cooling refers to the process of immersing servers, GPUs,
ASICs, and other IT hardware in a non-conductive fluid. The fluid
is a far more effective cooling medium than air is and so higher
efficiencies are achievable. Two-phase immersion cooling is similar
but the fluid boils on the hot components.
Why many large data centers have already moved or are considering
the move to immersion cooling?
1. Save floor space. Compare with traditional forced air cooling way(using precision
air conditioner), immersion cooling system will save much floor
space. Because no need rack system and no need air conditioner
indoor.
2. Save power. Compare with traditional forced air cooling way(using precision
air conditioner), immersion cooling system will save much power.
For example, no need to install many air conditioners indoor, then
no compressor power consumption. For example, the bitcoin miners no
need air cooling fans. Thesewill save power around 18~25%.
3. Increase hardware lifepan. In immersion, machines operate in a 100% controlled environment
with no dust, no temperature of humidity fluctuations, no
impurities. This will extend the service life of the mining machine
or server. This will also reduce machine maintainance fee.
4. Increase hashrate of the mining machine.
For immersion cooling system, our dry cooler is the most cost-effective way to remove heat and a necessary
component of the immersion cooling system, We designed a full range
of immersion optimized dry coolers. From 5kW single fan unit to the
V-shaped 48-921kW dry coolers. Made in China, sized to your needs.
Features of dry cooler
High efficiency heat exchanger: Capacity designs for maximizing the heat transfer relative to the
energy consumption of the fan. Tube and tube coupling design for low pressure drop in the coil on
the media sides(maximum 100KPa at water designing condition). Our thermodynamic and aerodynamic designing software is long year
tested and proved in Germany |
Fan: Only choose low specific energy consumption fans. Fan nozzle designs for maximum air flow and air throw. Our fans from the world`s leading manufacturer are practically
proved to be reliable in operation and long lasting. Motor: protection class IP 54 and insulation class F. Air separator
for each fan. |
We facilitate you to have a long lasting and low maintainance
operation. Durable material and rigid enclosure with hard gloss powder coated
finish. Protective enclosure for both manifolds and U-bends. Unit design for outdoor installation. 100% leakage tested at 31bar. |
Options
| Coil design refrigerant: water, oil, glycol. | Multiple circuits. |
| Sub-cooling circuits. | Stainless steel or aluminum casing. |
| Coated aluminum or copper fins. | Explosion proof motor. |
| Customized fin spacing. | |
Technical parameter
- Dry cooler Flat series — Single row fans
H*FS*91
H*FS*125
H*FS*180 | Van Dim
mm | * | H*FS191 H*FS1125 H*FS1180 | H*FS291 H*FS2125 H*FS2180 | H*FS391 H*FS3125 H*FS3180 | H*FS491 H*FS4125 H*FS4180 | H*FS591 H*FS5125 H*FS5180 | H*FS691 H*FS6125 H*FS6180 | H*FS791 H*FS712 H*FS7180 | H*FS891 H*FS8125 H*FS8180 |
| Rated Capacities (kW) Heat Exchange Surface (㎡) |
Fluid
Coolers | 910 | D | 61kW-648kW 120㎡-2307㎡ (Water/Ta25℃/Tin40℃/Tout35℃) |
| 1250 | 138kW-1528kW 302㎡-4542㎡ (Water/Ta25℃/Tin40℃/Tout35℃) |
| 1800 | 198kW-1920kW 363㎡-5084㎡ (Water/Ta25℃/Tin40℃/Tout35℃) |
Freon
Condensers | 910 | F | 73kW-764kW 120㎡-2307㎡ (R404A/Ta35℃/Tk50℃) |
| 1250 | 166kW-1549kW 302㎡-4842㎡ (R404A/Ta35℃/Tk50℃) |
| 1800 | 230kW-1920kW 330㎡-5103㎡ (R404A/Ta35℃/Tk50℃) |
Ammonia
Condensers | 910 | A | 72kW-779kW 141㎡-2721㎡ (NH3/Ta35℃/Tk50℃ ) |
| 1250 | 181kW-1554kW 351㎡-5625㎡ (NH3/Ta35℃/Tk50℃ ) |
| 1800 | 262kW-1986kW 421㎡-5907㎡ (NH3/Ta35℃/Tk50℃ ) |
Gas
Coolers | 910 | G | 49kW-862kW 96㎡-1824㎡ ( CO2/Tair32℃/Tin113℃/P94Bar/Tout34℃) |
Oil
Coolers | 910 | O | 49kW-1041kW 120㎡-2307㎡ (OIL ISO VG 46/Ta35℃/Tin85℃/Tout60℃) |
| 1250 | 75kW-2021kW 302㎡-4842㎡ (OIL ISO VG 46/Ta35℃/Tin85℃/Tout60℃) |
| 1800 | 92kW-2505kW 330㎡-5103㎡ (OIL ISO VG 46/Ta35℃/Tin85℃/Tout60℃) |
Fan
Model | 910 | EC | W3G910KU2503 (2.55kW) or FN091-ZIQ.GL.V5P1 (3.2kW) |
| 910 | AC | W6D910GB0101 (2.02kW) or FN091-SDS.6N.V7P2 (1.85kW) |
| 1250 | EC | 160M2-8P-5.5kW/720RPM/1250_5-5_LP_39°_PPG_9W2L |
| 1250 | AC | 160M2-8P-5.5kW/720RPM/1250_5-5_LP_39°_PPG_9W2L |
| No of Fans | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
Overall
Dimensions | 910 | Lenth-1 | 1980 | 3480 | 4980 | 6480 | 7980 | 9480 | 10980 | 12480 |
| Lenth-2 | 2280 | 4080 | 5880 | 7680 | 9480 | 11280 | 13080 | 14880 |
| Width | 1230 |
| Height | 1740 (Including 800Leg) |
| 1250 | Lenth | 2600 | 4600 | 6600 | 8600 | 10600 | 12600 | 14600 | 16600 |
| Width | 2280 |
| Height | 1970 (Including 800Leg) |
| 1800 | Lenth | 3000 | 5400 | 7800 | 10200 | 12600 | 15000 | 17400 | // |
| Width | 2280 |
| Height | 2170 (Including 1000Leg) |
Some Reference:
- For data center cooling or server liquid cooling:
Country: Mongolia Application: match with precision air conditioner Cooling capacity: 17.6kW Cooling medium: 34% ethylene glycol Supply power: 400V/3P/50Hz Fan brand: Ziehl-Abegg | Country: Russia Application:data center cooling Cooling capacity: 763kW Cooling medium: water Supply power: 380V/3P/50Hz Fan brand: Ziehl-Abegg |
 
| 
|
