Energy Saving Variable Frequency Drive 2 Ton Rack And Pinion
Construction Site Elevator
Description
Construction hoist is a kind of elevator that is driven by motors
to run the cage with pinions rolling on the rack of mast, the
device has been equipped with anti-falling safety device, overload
device and numerous mechanical interlocking safety instrument to
ensure people and cargo safety.
The mast is attached to the building by the wall frame, it can be
hoisted with the buildings increased.
The product has absorbed advanced manufacturing technology, it has
the characteristics of innovative design, reasonable structure,
simple operation, easy accessibility, safe and reliable.
Its safety design and configuration is full compliance with
international standards.
It is mainly applicable to high-rise building construction
personnel and cargo transport of bridges, chimneys, buildings, also
can be used for the vertical transportation of warehouse, loading
docks.
Configuration
There is a electrical small crane available to facilitate the
assembly of the construction elevator.
Cage doors are modularized for flexible use.
The construction rack and pinion elevators are Variable Frequency
Drive (VFD), with low starting current and much less wear and tear,
very smooth starting and stopping.
Manual or Automatic Controls of the hoist is optional.
Lighting inside construction elevator car is LED ceiling lamp
The construction material hoist cage roof doors are equipped with
Interlock.
Equipped with hoist drop test facility with remote control.
Technical Data
| Item & Article No. | SC200BG, KP-B09 |
| Payload capacity | 2,000 kg |
| Lifting speed | 0–60 m/min. |
| Max. lifting height | 450 meters |
| Cage width (internal) | 1.5 m |
| Cage length (internal) | 3.2 m |
| Cage height (internal) | 2.35 m |
| Motor control | FC control |
| Engine power | 2x23 kw/87Hz |
| Gearbox | Helical reducer |
| Safety device type | centrifugal brake |
| Power supply range | 380–500 V, 50 or 60 Hz, 3 phase |
| Type of mast | square column 650*650*1508 mm with bolted rack |
| Rack module | 8 |
| * Increased lifting height on request. 250 m with step-up
transformer only. 400 m with step-up/step-down transformer. |
