1270nm 1330nm 10km 40G QSFP+ Transceiver
Juniper Compatible 40G QSFP+LR4 1270~1330nm 10km LC Optical
Transceiver Module DOM
Product Features
● Four-channel full-duplex transceiver modules
● Transmission data rate up to 11.2Gbit/s per channel
● Up to 10km transmission of single mode fiber
● Low power consumption <2.5W,
● Operating case temperature
0°C to +70°C
● 3.3V power supply voltage
● RoHS 6 compliant
● Hot Pluggable QSFP form factor
● Single MPO connector receptacle
● Built-in digital diagnostic function
Applications
● InfiniBand QDR, DDR and SDR
● 40G Ethernet
● Proprietary High Speed Interconnections
● Data center
Product Descriptions
Olinkcom’s OLSQxx4XL-CD10 is a Four-Channel, Pluggable, Parallel,
Fiber-Optic QSFP+ Transceiver for InfiniBand QDR/DDR/SDR,
10G/8G/4G/2G fiber channel . and SAS Applications. The QSFP
full-duplex optical module offers 4 independent transmit and
receive channels, each capable of 10.3Gbps operation for an
aggregate
data rate of 40Gbps 10km using single mode fiber. These modules are
designed to operate over single mode fiber systems using 1310nm DFB
laser array. An optical fiber ribbon cable with an MPO/MTPTM
connector can be plugged into the QSFP module receptacle. QSFP+ PSM
LR4 is one kind of parallel transceiver which provides increased
port density and total system cost savings.
Optical Characteristics (TOP(C) = 0 to 70 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter |
| Operating Wavelength | λc | 1290 | 1310 | 1330 | nm | |
| Ave. output power | PAVE | -7 | | +2.3 | dBm | |
Difference in launch power between any two lanes (OMA) | DL | | | 5 | dB | |
| Extinction Ratio | ER | 3.5 | | | dB | |
| Peak power, each lane | PP | | | 4 | dBm | |
| Dispersion penalty, each lane | TDP | | | 3.5 | dB | |
Average launch power of OFF transmitter, each lane | POFF | | | -30 | dB | |
Eye Mask coordinates: X1, X2, X3, Y1, Y2, Y3 | SPECIFICATION VALUES 0.23, 0.34, 0.43, 0.27, 0.35, 0.4 | Hit Ratio = 5x10-5 |
| Receiver |
| Operating Wavelength | λc | | 1310 | | nm | |
| Stressed receiver sensitivity in OMA(OLSQ854XM-CDS1) | PSEN1 | | | -12.5 | dBm | 3 |
| Average Receive Power,each lane | PAVE | -11 | | +2.4 | dBm | |
| Receiver Reflectance | Rrx | | | -12 | dB | |
| LOS Assert | Pa | -30 | | | dBm | |
| LOS De-assert | Pd | | | -15 | dBm | |
| LOS Hysteresis | Pd-Pa | 0.5 | | | dB | |
Notes:
1.Measured with conformance test signal at TP3 for BER = 10-12 Receiver Characteristics
More details of our products:
High Reliable Optical Components and Excellent Design
1.DLB laser and PIN photodiode
- Long transmission distance.
- High speed and performance
2.Thick Gold Finger
- Stable operation
- Repeated plug and unplug
3.Plating Hard Gold Shell
- Good heat dissipation
- Can't be deformed easily
- Anti-electromagnetic interference
Cost-effective and Reliable Transmission
- Low power consumption and low latency allow your network devices to
work efficiently
- DOM function supports real-time monitoring for transceiver status.
Comprehensive Performance Test with our Advanced Equipment
- Certified and tested on the automatic quality control system, to
ensure the high performance in the actual working environment.Fully Tested for compatibility in our matched switches.
Our Packing & Labeling:
- Anti-static box
- Individual package
- 10pcs/pallet
- 20pcs/pallet
Our all modules have 3 years warranty!
