10GBASE-LR 10G SFP+ Transceiver SMF 1310nm 10km Alcatel Compatible
Alcatel-Lucent SFP-10G-LR Compatible 10GBASE-LR SFP+ Transceiver
SMF 1310nm 10km
The Alcatel-Lucent-LR compatible transceiver provides a high
performance and cost-effective solution for 10.3125Gbps
(10GBASE-LR) fiber connectivity over single-mode optical cable. It
is programmed to be suitable for use with Alcatel-Lucent 10-Gigabit
Ethernet Switches, Security gateway appliances and Network
Adapters.
Product Features
● SFP+ Form factor compliant with SFP+ MSA SFF-8431 and SFF-8461
standard
● Hot-swappable input/output device plugs into 10 Gigabit Ethernet
SFP+ port
● Digital optical monitoring (DOM) capability for diagnostics
● Supports up to 11.3Gb/s bit rates
● Alcatel Compatible
● Up to 10km Reach
● 1310nm Wavelength
Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter |
| Operating Wavelength | λ | 1260 | 1310 | 1355 | nm | |
| Ave. output power (Enabled) | PAVE | -6 | | 0 | dBm | 1 |
| Side-Mode Suppression Ratio | SMSR | 30 | | | dB | |
| Extinction Ratio | ER | 4 | 4.5 | | dB | |
| RMS spectral width | Δλ | | | 1 | nm | |
| Rise/Fall time (20%~80%) | Tr/Tf | | | 50 | ps | |
| Dispersion penalty | TDP | | | 3.2 | dB | |
| Relative Intensity Noise | RIN | | | -128 | dB/Hz | |
| Output Optical Eye | Compliant with IEEE 0802.3ae |
| Receiver |
| Operating Wavelength | | 1270 | | 1600 | nm | |
| Receiver Sensitivity | PSEN2 | | | -14.4 | dBm | 2 |
| Overload | PAVE | | | 0.5 | dBm | |
| LOS Assert | Pa | -30 | | | dBm | |
| LOS De-assert | Pd | | | -18 | dBm | |
| LOS Hysteresis | Pd-Pa | 0.5 | | | dB | |
Notes:
1. Average power figures are informative only, per IEEE 802.3ae.
2. Measured at the BER less than 1E-12, back to back. The measure
pattern is PRBS 231-1 with worst ER=4.5@ 10.3125Gb/s.
Digital Diagnostic Specifications
The OLSP311XL-C(I)D10 transceivers can be used in host systems that
require either internally or externally calibrated digital
diagnostics.
| Parameter | Symbol | Units | Min. | Max. | Accuracy | Note |
| Transceiver temperature | DTemp-E | ºC | -45 | +90 | ±5ºC | 1,2 |
| Transceiver supply voltage | DVoltage | V | 2.8 | 4.0 | ±3% | |
| Transmitter bias current | DBias | mA | 2 | 80 | ±10% | 3 |
| Transmitter output power | DTx-Power | dBm | -8 | +2 | ±2dB | |
| Receiver average input power | DRx-Power | dBm | -16 | 0 | ±2dB | |
Notes:
1.When Operating temp.=0~70 ºC,the range will be min=-5,Max=+75
2. Internally measured
3. The accuracy of the Tx bias current is 10% of the actual current
from the laser driver to the laser
Wide Application
● Widely used on 10G switches, routers, servers, NICs and other
transmission equipment
● Suitable for data center, enterprise wiring closet, radio &
baseband unit and other environments
● 10GBASE-LR/LW at 10.3125Gbps
● 10G Fiber Channel
● CPRI and OBSAI
● Other optical links
The OLSP311XL-CD10 is a Class 1 laser product. It fully complies
with the multi-sourcing agreement (MSA) which enables it to work in
all MSA compliant platforms. OLSP311XL-CD10 must be operated within
the specified temperature and voltage limits. The optical ports of
the module shall be terminated with an optical connector or with a
dust plug.
