10GBASE-LR 10G SFP+ Optical Transceiver Single Mode 1310nm 10km

10GBASE-LR 10G SFP+ Optical Transceiver 1310nm 10km Single Mode

Intel E10GSFPLR Compatible 10GBASE-LR SFP+ 1310nm 10km Transceiver

This 10GbE SFP+ LR module is suitable for use with Intel networking systems. It supports data-rate of 10.3125Gbps (10GBASE-LR) or 9.953Gbps (10GBASE-LW), providing fiber connectivity up to 10km on single mode fiber. The module is programmed and tested to ensure working with Intel 10 Gigabit switches, servers, and other platforms.

Product Features

● 10Gb/s serial optical interface

● Duplex LC connector

● Hot pluggable SFP+ footprint

● Compliant with SFP+MSA

● Uncooled 1310nm DFB transmitter, PIN photo-detector

● Applicable for 10km SMF connection

● Low power consumption, < 1W

● Digital Diagnostic Monitor Interface

General Operating Characteristics

Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Notes:

1. Average power figures are informative only, per IEEE 802.3ae.

2. Measured at the BER less than 1E-12, back to back. The measure pattern is PRBS 2^31-1 with worst ER=4.5@ 10.3125Gb/s.

Applications

● 10GBASE-LR/10GBASE-LW Ethernet

● 10G Fibre Channel

● 10G Data Center Switches and Routers

● 10G Network interface cards and Fiber Media Converters

● LTE systems

● Other Optical Links

The OLSP311XL-CD10 is a Class 1 laser product. It fully complies with the multi-sourcing agreement (MSA) which enables it to work in all MSA compliant platforms. OLSP311XL-CD10 must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug.

Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able to offer a vast range of optical modules from 155Mbps ~ 100Gbps, including CFP2, QSFP+, XFP, SFP+, SFP, PON and CWDM, DWDM solutions, to support various protocols and meet with different requirements on Fiber Channel, Ethernet, SONET/SDH, FTTx, Data Center etc. And all product quality is backed by our strong R&D ability, rigorous quality control procedure and rich production experience. Our modules are exported to China domestic market, Asia, Southeast Asia, Europe and the American market, etc.

With the concept of “Quality First, Service Oriented, Realistic and Innovative, Continuous Improvement”, Olink keeps developing and optimizing product design solutions, to provide our valued customers with the most cost efficient product and service, as well as some customized products.