10GBASE-LR 10gb SFP+ Module 1310nm 10km Sfp+ Optical Transceiver

10GBASE-LR 10gb SFP+ Module 1310nm 10km Sfp+ Optical Transceiver

Ubiquiti UF-SM-10G Compatible 10GBASE-LR SMF 1310nm 10km SFP+ Module

Olinkcom's Ubiquiti UF-SM-10G compatible SFP+ module provides a high performance and cost-effective replacement, supporting data-rate of 10.3125Gbps (10GBASE-LR) or 9.953Gbps (10GBASE-LW) over single mode optical fiber. This module is programmed to be compatible with a wide range of Ubiquiti Networks equipment such as 10 Gigabit Ethernet (10 GbE) Switches, Routers, Network Interface Cards (NICs) and Media Converters.

Product Features

1. Hot-pluggable SFP+ footprint

2. 1310nm DFB transmitter, PIN photo-detector

3. Distance up to 10km on single mode fiber

4. Compliant with SFP+ MSA with LC connector

5. Single 3.3V power supply

6. Case operating temperature range: Commercial: 0°C to +70°C, Industrial: -40-85°C

Electrical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Note:

1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.

2. Into 100Ω differential termination.

3. 20 – 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1’s and four 0’s sequence in the PRBS 9 is an acceptable alternative.

4. LOS is an open collector output. Should be pulled up with 4.7kΩ – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1.

Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Notes:

1. Average power figures are informative only, per IEEE 802.3ae.

2. Measured at the BER less than 1E-12, back to back. The measure pattern is PRBS 2^31-1 with worst ER=4.5@ 10.3125Gb/s.

APPLICATIONS

• 10GBase-LR Ethernet

• 8x/10x Fibre Channel

• Access, Datacenter and Enterprise

• Mobile Fronthaul CPRI/OBSAI

FAQ

1. How about the warranty ?

All of our products are 3 years warranty (The return and change service within 1 year, repair within 2 years)

2. What is your transport method?

Depend on client's choice (Such as UPS,Fedex,TNT or DHL)

Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able to offer a vast range of optical modules from 155Mbps ~ 100Gbps, including CFP2, QSFP+, XFP, SFP+, SFP, PON and CWDM, DWDM solutions, to support various protocols and meet with different requirements on Fiber Channel, Ethernet, SONET/SDH, FTTx, Data Center etc. And all product quality is backed by our strong R&D ability, rigorous quality control procedure and rich production experience. Our modules are exported to China domestic market, Asia, Southeast Asia, Europe and the American market, etc.

With the concept of “Quality First, Service Oriented, Realistic and Innovative, Continuous Improvement”, Olink keeps developing and optimizing product design solutions, to provide our valued customers with the most cost efficient product and service, as well as some customized products.