Cisco Compatible ER 40Km single-mode 10G rate SFP+ 1550nm

Cisco Compatible ER 40Km single-mode 10G rate SFP+ 1550nm

The OLSP551XL-CD40 is a 10G ER single-mode multi-rate SFP+ transceiver using 1550nm wavelength and reaching up to 40Km distance on 9/125um fiber. The module can be used for 10G Ethernet, SONET or SDH networks.

Product Features

• Uncooled 1550nm DFB transmitter, PIN photo-detector
• Link length up to 40km
• Low Power Dissipation, < 1.3W
• Operating Case Temperature: 0 to 70 °C
• Single 3.3V power supply
• RoHS compliant and lead free

Electrical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Note:

1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.

2. Into 100Ω differential termination.

3. 20 – 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1’s and four 0’s sequence in the PRBS 9 is an acceptable alternative.

4. LOS is an open collector output. Should be pulled up with 4.7kΩ – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1.

Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Notes:

1. Measured with worst ER=5dB

2. PRBS 2^{31 – 1} and BER<10^-12.

Applications

● 10GBASE-ER/EW at 10.3125Gbps

● OTN G.709 OTU1e/2/2e

● 4x, 8x and 10x 10G Fiber Channel

● Other optical links

● 10G Ethernet

Compatibility

Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able to offer a vast range of optical modules from 155Mbps ~ 100Gbps, including CFP2, QSFP+, XFP, SFP+, SFP, PON and CWDM, DWDM solutions, to support various protocols and meet with different requirements on Fiber Channel, Ethernet, SONET/SDH, FTTx, Data Center etc. And all product quality is backed by our strong R&D ability, rigorous quality control procedure and rich production experience. Our modules are exported to China domestic market, Asia, Southeast Asia, Europe and the American market, etc.

With the concept of “Quality First, Service Oriented, Realistic and Innovative, Continuous Improvement”, Olink keeps developing and optimizing product design solutions, to provide our valued customers with the most cost efficient product and service, as well as some customized products.