Juniper Compatible 10G LR SFP+ Transceiver Module 1310nm 10km
Juniper Networks EX-SFP-10GE-LR Compatible 10G LR SFP+ Transceiver
The Juniper Compatible LR optics is high performance and cost
effective SFP+ LR transceiver. It supports data-rate of 10.3125Gbps
(10GBASE-SR) over single-mode fiber cable. It is programmed to be
compatible with a wide range of Juniper Switches, Routers and
Ethernet Media Converters
Product Features
● Multi rate of up to 11.3Gb/s
● 1310nm DFB transmitter
● PIN Receiver
● Duplex LC connector
● Up to 10km on SMF
● < 1W Power Dissipation
● Digital Diagnostic Monitor Interface
● 10G Ethernet compliance or SDH/SONET
● 0℃ to +70℃ / -40~85℃ case operating temperature range
Absolute Maximum Ratings
Parameter | Symbol | Min. | Max. | Unit | Note |
Supply Voltage | Vcc | -0.5 | 4.0 | V |
|
Storage Temperature | TS | -40 | 85 | °C |
|
Relative Humidity | RH | 0 | 85 | % |
|
Note: Stress in excess of the maximum absolute ratings can cause
permanent damage to the transceiver.
General Operating Characteristics
Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
Data Rate |
| 9.953 | 10.3125 | 11.3 | Gb/s |
|
Supply Voltage | Vcc | 3.13 | 3.3 | 3.47 | V |
|
Supply Current | Icc5 |
|
| 300 | mA |
|
Operating Case Temp. | Tc | 0 |
| 70 | °C |
|
TI | -40 |
| 85 |
|
Digital Diagnostic Specifications
The OLSP311XL-C(I)D10 transceivers can be used in host systems that
require either internally or externally calibrated digital
diagnostics.
Parameter | Symbol | Units | Min. | Max. | Accuracy | Note |
Transceiver temperature | DTemp-E | ºC | -45 | +90 | ±5ºC | 1,2 |
Transceiver supply voltage | DVoltage | V | 2.8 | 4.0 | ±3% |
|
Transmitter bias current | DBias | mA | 2 | 80 | ±10% | 3 |
Transmitter output power | DTx-Power | dBm | -8 | +2 | ±2dB |
|
Receiver average input power | DRx-Power | dBm | -16 | 0 | ±2dB |
|
Notes:
1.When Operating temp.=0~70 ºC,the range will be min=-5,Max=+75
2. Internally measured
3. The accuracy of the Tx bias current is 10% of the actual current
from the laser driver to the laser
Applications
● Widely used on 10G switches, routers, servers, NICs and other
transmission equipment
● Suitable for data center, enterprise wiring closet, radio &
baseband unit and other environments
● Other optical links
● 10G Ethernet
Compatibility
Olinkcom's Juniper Compatible 10GBASE-LR SFP+ transceiver can be
worked with the below Juniper networks equipment.
• EX2300-24T
• EX2300-24P
• EX3300 Ethernet Switch-EX3300-24T
• EX3300 Ethernet Switch-EX3300-48T
• EX3300 Ethernet Switch-EX3300-48T-BF
• EX3300 Ethernet Switch-EX3300-24P
• EX3300 Ethernet Switch-EX3300-48P
• EX3300 Ethernet Switch-EX3300-24T-DC
• EX4300-48T-AFI
• EX4300-48T-DC
• EX4300-48T-DC-AFI
• EX4300-32F
• EX4300-32F-DC
• EX4550-32F
• EX4550-32T
• EX4600-40F-AFO
