Industrial PoE Media Converter With Gigabit SC WDM Fiber
Introduction to Gigabit Media Converter
IM-PC111GE series is the 10/100/1000 Mbps Din Rail PoE media
converter featuring
- Comply with IEEE802.3af/at
- power on PoE IP cameras through the Ethernet cable
- simple construction
- power range up to 100 meters
- operating temperature -40℃ to + 75℃
- meet IP40 protection degree and EMC industrial grade requirements
- DIN rail installation
- pass through dangerous environmental certification
- comply with FCC and CE standards
The reliable industrial grade design could ensure continuous and
stable operation of the automation system.
Key Features Fiber Optic Converter
- Support power on POE IP cameras through the wireless access point
(AP) of 5 categories of Ethernet cable.
- IEEE 802.3af /at power on to 1 RJ45 port
- 1 x 10/100/1000Mbps Auto-sensing RJ45 port
- 1 x 1000Mbps fiber port
- 6KV Ethernet surge protection, adapt to a harsh outdoor environment
- Support Auto MDI/MDIX
- Flow control mode: full duplex with IEEE 802.3x standard,
half-duplex with Back pressure standard
- IEEE 802.3 10Base-T and IEEE 802.3u 1000Base-TX compliant
- Max power to 15.4W under af standard, 30W under at standard to each
PoE port
- Detect the PoE models of electrical equipments.
- A store-and-forward switching mechanism
Specification of Media Converter Unmanaged
| Product Name | Industrial PoE Fiber Media Converter |
| Model No. | IM-PC111GE |
| Port | 1x1000M SFP Fiber SM: 1310nm/1550nm, 20Km; 1490nm/1550nm, 40~120Km MM: 1310nm, 2Km; 850nm, 500-meter 1x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) 1x6-PIN Power Terminal Block |
Protocol | IEEE 802.3(10Base-T) IEEE 802.3u(100Base-TX) IEEE 802.3ab(1000Base-TX) IEEE 802.3af 15.4W(PoE) IEEE 802.3at 30W(PoE+) |
| Switching features | Transmission mode: storage and forward Forwarding delay: <10us System bandwidth: 4Gbps (non-traffic jam) MAC: 4K Packet buffer size: 1.75Mb |
| Network media | 10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) Fiber port transmission distance: 20Km,40Km,60Km,80Km,100Km |
| LEDs | Power, Fiber, Network, PoE PWR: Power
Fiber: FX1, FX2 On: transmission is normal Off: transmission is NOT normal(faulty optical module or
disconnected)
Copper orange: PoE indicator On: PoE is working Off: PoE is not working or this is Non-PoE device
Copper green: Speed indicator On: transmission speed is 1000Mbps Blinking: in transmission Off: Disconnected or working speed is 10/100Mbps |
| Power supply | PoE power supply input voltage: 48V (max 52V) Single PoE power supply output power: 30W (port 1)
Total budget: 30W PoE output voltage: 48V Reverse connection: support |
| Environment | Working temperature: -40°～ 75°C Storage temperature: -40°～ 85°C Working humidity: 10%～90%,non-condensing Storage humidity: 10%～95%,non-condensing |
| Industry Standards | ESD: IEC61000-4-2, ±15KV air, ±6KV contact EFT: IEC61000-4-4, General ±6KV Surge: IEC61000-4-5, Differential ±2KV, Common±6KV |
| Safety | CE-EMC: EN 55032:2015+AC: 2016+A1:2020+A11: 2020 EN 55035:2017+A11: 2020/EN IEC 61000-3-2:2019/A1: 2021 EN 61000-3-3: 2013/A2: 2021/AC:2022 CE-LVD: EN IEC 62368-1: 2020+A11:2020 FCC: 47 CFR FCC Part 15 Subpart B(Class B) ANSI C63.4: 2014 |
| Mechanical information | Shell: Corrugated metal shell Safety class: IP40 Dimension: 113.8 x 93 x 34.9mm Mounting method: Din-rail mounting |
| Warranty | 3 years |
Quality Guarantee
Quality is the priority.
All the products we offer are brand new with new components and
parts.
We absolutely never use old and refurbished materials.
Every product must be tested before shipping to our customers.
The quality is attached to great importance during the whole
production process.
After-sales Service
5 Years Manufacturer Warranty (Excluding contrived damage or
misusage).
If there is any compatibility problem or any quality problem, the
goods can be returned to us to repair or replace.
The buyer should be responsible for all the charges of returning
and second shipping.
Application of PoE Fiber Media Converter
Photos
Q&A
1. What is MoQ?
1 Pc/Pair.
For many models, we have stock, it is easy to send samples for your
testing.
2. Can I have a discount?
Yes and it is usually based on quantity and after sample testing.
3. What is your warranty period?
For commercial models like fiber Ethernet media converters or fiber optic PoE switches, it is 1 year.
For industrial-grade products, it is 3 years.
We do lifetime technical support if the models are from Olycom
company.
