10/100M Industrial Unmanaged POE Network Switch 1 SFP Port And 2
RJ45 Port
Introduction of 10/100M Industrial Unmanaged POE Network Switch
IM-FP122FE series is the 10/100 Mbps industrial POE fiber switch,
comply with IEEE802.3af/at, power on POE IP cameras through the
Ethernet cable, simple construction, power range up to 100 meters,
operating temperature -40 ℃ to + 75 ℃, meet IP40 protection degree
and EMC industrial grade requirements, DIN rail installation, pass
through dangerous environmental certification and comply with FCC
and CE standards. The reliable industrial grade design could ensure
continuous and stable operation of the automation system.
Key Features of 10/100M Industrial Unmanaged POE Network Switch
- Support power on POE IP cameras through the wireless access point
(AP) of 5 categories of Ethernet cable.
- IEEE 802.3af/at power on to 1 ~ 2 RJ45 ports
- 2x 10/100bps Auto-sensing RJ45 ports
- 1x 100Mbps SFP fiber port
- 6 KV Ethernet surge protection, adapt to a harsh outdoor
environment
- Support Auto MDI/MDIX
- Flow control mode: full duplex with IEEE 802.3x standard,
half-duplex with Back pressure standard
- IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
- Max power to15.4W under af standard, 30W under at standard to each
PoE port
- Detect the PoE models of electrical equipments.
- A store-and-forward switching mechanism
- Operating environment temperature:-40 ° ~75 ° c
Specification of 10/100M Industrial Unmanaged POE Network Switch
| Product Name | 10/100Mbps Industrial Unmanaged POE Fiber Switch (1F+2TP) |
| Model No. | IM-FP122FE |
| Port | 1x 100Mpbs SFP port SM:1310nm/1550nm,20Km 1490nm/1550nm,40~120Km MM:1310nm,2Km 2x10/100M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Switching features | Transmission mode: storage and forward System bandwidth:40Gbps (non-traffic jam) DRAM size: 128M
Flash size: 16M
Packet buffer size: 4Mb |
| Network media | 10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100BASE-TX: CAT5 or above shielded twisted pair(≤100m) SFP port,transmission distance: 20Km,40Km,60Km,80Km,100Km |
| LEDs | Power, network, fiber |
| Power supply | POE power supply input voltage: 48V (max 52V), Single PoE power supply output power: 15.4W (port 1~2) (802.3at standards required special instructions) |
| Environment | Working temperature:-40°～ 75°C Storage temperature:-40°～ 85°C Working humidity:10%～90%,non-condensing Storage humidity:10%～95%,non-condensing |
| Industry Standards | EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A EMS:EN 61000-4-2 (ESD) Level 3,EN 61000-4-3 (RS) Level 3, EN
61000-4-4 (EFT) Level 3,EN 61000-4-5 (Surge) Level 3, EN 61000-4-6
(CS) Level 3,EN 61000-4-8 Traffic Control: NEMA-TS2 Vibration:IEC 60068-2-6 Freefall:IEC 60068-2-32 Shock:IEC 60068-2-27 Rail Traffic: EN 50121-4 |
| Safety | CE Mark , commercial CE/LVD EN60950 |
| Mechanical information | Shell: Corrugated metal shell Safety class: IP40 Dimension: 113.8 x 93 x 34.9mm Mounting method: Din-rail mounting |
| Warranty | 3 years |
Package And Delivery of 10/100M Industrial Unmanaged POE Network Switch
Selling Units: Single item
Single Package Size:22*16*6cm
Single Gross Weight:0.45kg
Package Type:Shipping dimension for 1pc 22*16*6cm
One unit device and one user manual are inside one box, sealed and
well protected.
44pcs /carton, the carton dimension is 67*33*47cm
FAQ of 10/100M Industrial Unmanaged POE Network Switch
Q: What is your minimum quantity?
A: We do not have MOQ, 1 sample is available.
Q: How long is the lead time?
A: Usually 3-5days, but need to check when you process orders.
Q: Do you have CE, FCC, ROHS?
A: Yes, authenticated of CE, RoHS, FCC, ISO9001, and etc.
Q: How do you guarantee the quality?
A: We absolutely never use old and refurbished materials. Always a pre-production sample before mass production; 48 hours
aging test before delivery. Always final Inspection before
shipment.
Application of 10/100M Industrial Unmanaged POE Network Switch
Photo of 10/100M Industrial Unmanaged POE Network Switch
