Olycom CCTV 120W PoE Fiber Switch 4 Port
Key Feature of 4 Port PoE Switch
- Supply active PoE(DC48V) to PoE IP cameras, WAPs etc. through Cat5
or above copper cable
- 2x100Mbps Auto-sensing SFP fiber ports
- 4x10/100Mbps Auto-sensing RJ45, IEEE 802.3af/at power on to 1~ 4
ports
- Detect the PoE modes(Non-PoE, 802.3af/at compliant) of connected
electrical equipment
- 6KV Ethernet surge protection, adapt to a harsh outdoor environment
- Support Auto MDI/MDIX
- Flow control mode: full duplex with IEEE 802.3x standard,
half-duplex with Back pressure standard
- IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
- DIN rail or Wall installation
- Power range up to 100 meters
- Comply with FCC and CE standards
- A store-and-forward switching mechanism
- Operating environment temperature: -40°C～75°C
It is an ideal solution for IP Surveillance, wind, electricity,
subway PIS, assembly automation, power SCADA, sewage treatment,
metallurgy, intelligent transportation, rail transportation,
military and other industries
Technical Data of Industrial PoE Switch
| Product Name | 10/100Mbps Industrial PoE Fiber Switch(2F+4TP) |
| Model No. | IM-FP244FE |
| Port | 2x100M SFP Fiber SM: 1310nm/1550nm, 20Km; 1490nm/1550nm, 40~120Km MM: 1310nm, 2Km; 850nm, 500-meter 4x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) 1x6-PIN Power Terminal Block |
| Protocol | IEEE 802.3(10Base-T) IEEE 802.3u(100Base-TX) IEEE 802.3af 15.4W(PoE) IEEE 802.3at 30W(PoE+) |
| Switching Features | Transmission mode: storage and forward Forwarding delay: <10us System bandwidth: 1.2Gbps (non-traffic jam) MAC: 4K Packet buffer size: 1.75Mb |
| Network Media | 10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100BASE-TX: CAT5 or above shielded twisted pair(≤100m) |
| LEDs | Power, Fiber, Network, PoE PWR: Power
Fiber: FX1, FX2 On: transmission is normal Off: transmission is NOT normal(faulty optical module or
disconnected)
Copper orange: PoE indicator On: PoE is working Off: PoE is not working or this is Non-PoE device
Copper green: Speed indicator On: transmission speed is 1000Mbps Blinking: in transmission Off: Disconnected or working speed is 10/100Mbps |
| Power Consumption | Full loading without PoE≤5W |
| Power Supply | PoE power supply input voltage: 48V (max 52V) Single PoE power supply output power: 30W (port 1~4)
Total budget: 120W PoE output voltage: 48V Reverse connection: support |
| PoE Wiring | 1/2 (V+), 3/6 (V-) |
| Environment | Working temperature: -40°C～75°C Storage temperature: -40°C～85°C Working humidity: 10%～90%, non-condensing Storage humidity: 10%～95%, non-condensing |
| Industry Standards | ESD: IEC61000-4-2, ±15KV air, ±6KV contact EFT: IEC61000-4-4, General ±6KV Surge: IEC61000-4-5, Differential ±2KV, Common±6KV |
| Certification | CE-EMC: EN 55032:2015+AC: 2016+A1:2020+A11: 2020 EN 55035:2017+A11: 2020/EN IEC 61000-3-2:2019/A1: 2021 EN 61000-3-3: 2013/A2: 2021/AC:2022 CE-LVD: EN IEC 62368-1: 2020+A11:2020 FCC: 47 CFR FCC Part 15 Subpart B(Class B) ANSI C63.4: 2014 |
| Mechanical information | Shell: Corrugated metal shell, IP40 grade level Dimension: 114*93*35mm Mounting method: Din-rail/Wall mounting Weight: 0.35Kg/0.45Kg(Net/Gross) |
| Warranty | 3 years, lifetime technical support |
Packing List
1pc switch
1pc user manual
Remark
Accessories(DIN rail bracket, optical module, power supply,
patchcord, network cable etc.)are NOT included in the packing box,
please prepare it by yourself or purchase a whole set from us
Shipping box information
Product size: 11.4*9.3*3.5cm
Inner box size: 23*16.5*5.8cm
Product weight: 0.35Kg
Packing weight: 0.45Kg
Master box size: 67*33*47cm
Packing quantity: 40Pcs
Packing weight: 20Kg
Accessories
| Industrial Optical Module |
| OSPL1E06D-85 | 100BASE-FX(850nm) |
| OSPL1E06D | 100BASE-FX |
| OSPL1E20D | 100BASE-LX |
| OSPL1E40D | 100BASE-EX |
| OSBL1E20D-35 | 100BASE-BX-U(TX 1310 RX1550) |
| OSBL1E20D-53 | 100BASE-BX-D(TX 1550 RX1310) |
| Industrial DIN Power Supply |
| IM-DAC220/DC12V1.67A | AC220V to DC12V1.67A, -30℃～70℃ |
| IM-DAC220/DC24V1A | AC220V to DC24V1A, -30℃～70℃ |
Application of Fast Ethernet Fiber Switch
FAQ
What chip is it based?
Olycom: Realtek
Can I customize it?
Olycom: Yes
We support OEM services like logo, model name, label, PVC mask and
product parts(mounting kit, power terminal block etc.)
Do you have any certification?
Yes, our company is ISO9001 certified.
We have CE/FCC/RoHS/E-mark/CCC certificates for our models.
What does the label look like?
There will be 2 copies for each piece of manufactured product. One
is attached on the device, the other is on the packing box.
It is available in different languages and contents, so you can add
your logo or model name in it.
Do you support OEM&ODM?
Yes, this is our competitive advantage.
There is a detailed introduction in the below link.
https://www.industrialnetworkswitch.com/factory.html
What incoterms do you support?
We are an EXW factory, EXW term is our focus.
Sometimes we do FOB/CIF for bulk orders, this depends on cases.
Please talk with us for more information.
Do you attend some exhibitions?
Yes, we regularly attend IFSEC UK, MIPS RUSSIA, Security ESSEN
GERMANY and ISC West USA.
Sometimes we are an exhibitor for some small shows like Mitec
Malaysia, Secon Korea and Intersec Saudi Arabia.
Each time, we took many photos for displaying and record, please
let us know if you need to check.
Photo
