Electric Actuator Valve
Electric Actuator Ball Valve:
An electric actuated ball valve can be broken down into two main
components. The electric actuator (servo motor) and the ball valve.
For a 2-way ball valve, the electric motor can turn the ball 90
degrees to be either fully open or fully closed. For a 3-way valve,
the electric actuator can turn the ball between different circuits
depending if it is an L-port or T-port ball valve. They are mounted
together typically with a standard flange adhereing to ISO 5211.
This allows both the electric actuator or ball valve to be swapped
out with another one using the same flange size. There are various
housings and sizes of electric ball valves to allow you to find the
right one for your application.
Electric Actuator Butterfly Valve:
Electric actuator butterfly valves, which are used to control the
flow of a media remotely. They can have either a lug or wafer
connection style. The actuator either opens or closes the valve
with an electrical current, but doesn’t require energy to stay in
that state. The butterfly valve has a disc that rotates with the
actuator to open or close the butterfly valve. The butterfly valve
design allows for good sealing properties, durability, and
reliability for your application. Electrical actuators are easily
installed and wired into an existing system. There are various
housings, seals, and sizes of electrically controlled butterfly
valves to allow you to find the right one for your application.
Technical Data of Electric Actuator Valve:
| |
Air Pressure: 0.4 to 0.8 MPa | Electric Actuator Power: 380VAC, 220VAC, 110VAC (50/60Hz), 24VDC Electric Actuator Input: 4-20mA. DC |
Control Medium: Neutral Gas, Air |
Ambient Temperature: -20 to +60℃ |
Medium Temperature: -20 to +180℃ UPVC Ball Valve: -10 to +45℃ CPVC Ball Valve: -15 to +90℃ |
Normal Seal's Working Temperature: PTFE (-20 to +180℃), TFM (-30 to
+230℃) |
Manufacturing Standard: GB, ISO, ANSI, BS, DIN |
Electric Ball Valves for you to choose:
Electric Butterfly Valves for you to choose:
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
