Colorful Polyurethane EVA Fender , Low Reaction Force For Boat
Foam Filled Solid Fender is made of environmental protection
material and high elasticity polymeric material. long service life
and high economic value of this product is achieved by the high
quality material with performance of high strength, high
elasticity, high adhesion, anti-leakage,and aging resistance.
Xincheng Invented new foam fender manufacturing method with blind
hole hydrophobic foam as core and polyurea as outer coating, which
has following features:
The core material of foam filled fender is bind hole hydrophobic
foam with light weight and good energy absorption capability. It
wont absorb water even cracking
The polyurea protective coating has very good performance of anti
collision, anti friction, compression resistance, oil proof, water
proof and weather fastness.
The fender is made with flange and swivel for fast installation,
customer could install it very fast without any professional
guidance from experts.
Structures
Inner layer: Filled with Closed-cell EVA foam plastics core to
absorb elastic energy, which never sink;
Middle layer: Outer rubber and high strength polyamide cord fabric
are adopted to better seal the inner EVA foam;
Outer layer: Spraying with adjustable new polyurea elastic maerial,
the polyurea coating is permanent and that protect the outer layer
of fender from chemical corrosion resistance. It has more
durability than rubber because it can reduce the chance of denting
and scratches and will not get soften or fragile in hot or cold
temperature;
Ends: Equipped with galvanized flange, swivel and can add a
protective layer consist of chain and tire net;
FAQ
Q: What's the material of your EVA Foam Filled Fender products ?
A: the main raw material is light weight high elasticity foam
imported from Korea.
Q: Are you factory or trading company ?
A: We are manufacturing factory, located in Jimo district,Qingdao
city, 1 hour drive to Qingdao port and 40 minutes drive to Qingdao
airport, which is convenient in transportation logistics.
Q: Is OEM service available ?
A: yes
Q: What's the delivery time and payment terms ?
A: Delivery time is based on product model and order quantity.
normally it is around 7-15 working days.
The payment could paid by T/T, L/C, Western Union, Paypal, etc.
| Specification | Compression Deflection at 60% |
Diameter/ mm |
Length/mm |
Reaction Force/ KN |
Energy Absorption / KN/M |
| 300 | 500 | 38 | 1.8 |
| 400 | 800 | 56 | 2.6 |
| 500 | 1000 | 72 | 26 |
| 1000 | 1500 | 205 | 49 |
| 1000 | 2000 | 274 | 64 |
| 1200 | 2000 | 337 | 93 |
| 1500 | 3000 | 624 | 216 |
| 2000 | 3500 | 990 | 456 |
| 2500 | 4000 | 1680 | 918 |
| 3000 | 6000 | 2460 | 1695 |
| 4500 | 9000 | 19650 | 7860 |
NOTE: 1. Reaction force and Energy absorption tolerance is ±10%
2. Weight tolerance is ±10%
3. Special size can be produced follow customer’s needs.
