2'' Pneumatic Operated Flanged Ball Valve Stainless Steel 304

2'' Pneumatic Operated Flanged Ball Valve Stainless Steel 304

A pneumatic actuated ball valve can be broken down into two main components. The pneumatic actuator and the ball valve. For a 2-way ball valve, the pneumatic actuator can turn the ball 90 degrees to be either fully open or fully closed. For a 3-way valve, the pneumatic actuator can turn the ball between different circuits depending if it is an L-port or T-port ball valve. They are mounted together typically with a standard flange adhereing to ISO 5211. This allows both the pneumatic actuator or ball valve to be swapped out with another one using the same flange size.

A pneumatic actuator requires compressed air to operate. The actuator can either be single or double acting. A single acting pneumatic actuator uses compressed air to rotate the ball in one direction and uses a spring to move it back to the normal position. A double acting pneumatic actuator requires compressed air to move the ball in either direction. An air actuated ball valve is a reliable solution and often a lower investment cost for larger valves compared to an electric ball valve. There are various housings and sizes of pneumatic ball valves to allow you to find the right one for your application. Air operated ball valves are commonely used for remote control of a flow, like a water pipe or air hose.

Technical Data of Pneumatic Ball Valve:

Main Dimension of Pneumatic Ball Valve:

More Pneumatic Actuator Valves for you to choose:

Pneumatic Ball Valves
Pneumatic Butterfly Valves

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on