NBSANMINSE SDR5-34Z 4.0Mpa High Pressure Lubrication Pump AC380V
50Hz High Performance 60W 90W with Controller with Pressure switch
Performance and characteristics
. Rated working pressure 4.0Mpa : Sets the overflow valve, prevent
oil pump overload
. With functions of unloading :Stop working after removing the oil
pressure in the system is in charge of road, mainly used in the
quantitative type (pressure type or unloading type) thin oil
lubrication oil supply system
. Inside the pump with pressure switch (normally open AC220V/2A
DC36V/2A), to monitor the lubrication system that the main oil line
block and the pressure loss (optional parts)
. Inside the pump can match the PC-2 display controller, control
the operation time on and off (optional parts)
. Transparent resin oil tank
. Assort distributor : Pressure or pressure relief type thin oil
distributor
Attention
. Pressure switch as much as possible installed at the end of the
system main pipe, not within the oil pimp, it can ore correctly
detected the lubrication system condition with main pipe blocks the
flow and pressure loss
. If the host with PLC, should by the host PLC control oil pump run
and rest time, the oil pump without set controller; But if the host
does not PLC or with PLC wiring is not convenient, the oil pump
hall set the controller, the controller to the countdown control
lubrication pump working cycle : run and rest time.
. If the working power supply is not AC380V 50Hz, should indicate
the power and HZ when order power supply
. The following for is without pressure switch and controller of
the SDR series pump as an example illustrates the specific
technical parameters, it is same technical parameter with a
pressure switch or controller with same specification.
. Example : the rated flow 0.5L/min, oil capacity 3.0L, Rated
pressure 4.0MPa, the working power supply is AC380V50Hz, without
pressure switch and controller of SDR series thin grease pump
models for SDR5-34Z; lubrication pump with a pressure switch
(optional), type of SDR5-34PZ; lubrication pump with a controller
(optional), type of SDR5-34CZ; If the work is specific power
requirement, when you order it should indicate the voltage and
frequency, such as SDR5-34/460V60Hz.
| Project | Rated pressure (Mpa) | Rated flow (L/min) | Oil tank capacity (L) | Electric machine parameter | Code Type |
| Voltage (V) | Frequency (Hz) | Power (W) | Revolving speed (r/min) |
| Model |
| SDR2.5-34Z | 4.0 | 0.25 | 3.0 | AC380 | 50 | 60 | 1350 | 1.With pressure switch model after P, Like SDR2.5-34PZ. 2.With
controller model after C, Like SDR 2.5-34CZ. 3.Indicate the power,
Like SDR2.5-34Z/AC460V60Hz |
| SDR5-34Z | 0.50 | 90 | 2700 |
| SDR2.5-44Z | 0.25 | 4.0 | 60 | 1350 |
| SDR-5-44Z | 0.50 | 90 | 2700 |
| SDR2.5-64Z | 0.25 | 6.0 | 60 | 1350 |
| SDR5-64Z | 0.50 | 90 | 2700 |
| SDR2.5-94Z | 0.25 | 9.0 | 60 | 1350 |
| SDR5-94Z | 0.50 | 90 | 2700 |
