Quick Clamp Manual Large Metallographic Cutting Machine with Max
Section 100mm
Technical Data Download: iqualitrol Metallographic Cutting Machine iCut-408
Brief Introduction:
iqualitrol iCut-408 multifunctional cutting machine mainly used to
cut irregular metallographic samples such as round cylinder,
polygon, protruding platforms, etc.
iCut-408 adopts double-shells totally closed structure and double
quick clamp organization to guarantee cutting under absolutely safe
status. Feed speed is controllable.
In order to avoid sample organization burns during cutting, the
machine is furnished with strong cooling system, can avoid even
little burn of the sample surface while cutting.
Technical Specifications:
| Cutting Section | 100mm x 100mm |
| Rotation Speed | 2800rpm |
| Cutting Wheel | 350 x 2.5 x 32mm |
| Motor | 4Kw, AC380V/50Hz/3Ph |
| Dimension | 850 x 760 x 1400mm |
| Net Weight | 350Kg |
iqualitrol cutting dimension range:
What is Specimen Cutting:
When cutting a specimen from a larger piece of material, care must
be taken to ensure that it is representative of the features found
in the larger sample, or that it contains all the information
required to investigate a feature of interest.
One problem is that preparation of the specimen may change the
microstructure of the material, for example through heating,
chemical attack, or mechanical damage. The amount of damage depends
on the method by which the specimen is cut and the material itself.
Cutting with abrasives may cause a high amount of damage, while the
use of a low-speed diamond saw can lessen the problems. There are
many different cutting methods, although some are used only for
specific specimen types. iqualitrol provides the iCut-864 low speed
diamond saw for cutting OM (optical microscope), SEM (scanning
electron microscope), and even TEM (transmission electron
microscope) specimen.
