1000ml Plastic HDPE Bottle Blow Molding Machine Double Station
Three Head EBM SRB70D-3, 500ml Plastic Round Bottle Making Machine,
300ml Shampoo Plastic Bottle Production Machine
QUICK VIEWS
1. SRB70D-3 is double station triple head hdpe bottle blow molding
machine for 1000ml as maximum.
2. Its output for 500ml round bottle is 900Pcs/hour, output for
small square container is 750-800 Pcs/hour.
3. On-line auto-deflashing mould is supported to achive scraps
automatic removing. Bottles come out through product collectie
guidance shelves, the scraps comes out along sliding channels to
machine front.
|
TECHNICAL PARAMETERS
| Machine Model | Plastic Container Making Machine |
| Max Product Volume | 1 L |
| Machine Weight | 5.5 Tons |
| Machine Size | 3.8 x 2.2 x 2.5 m |
| Screw Diameter | 70 mm |
| Plasticizing Capacity | 90 KG |
| Clamping Force | 68 KN |
| Platen Size | 320 x 390 mm |
| Platen Opening Stroke | 150~500 mm |
| Max Mould Size | 360 x 360 mm |
| Triple Head Central Distance | 110 mm |
| Max Product Diameter or Width | 85 mm |
| Material Cutting Method | Hot Cutting |
| Max Die Diameter | 100 mm |
| Total Power | 48.5 KW |
| Average Energy Consumption | 32.5 KW |
PRODUCTION ARRANGEMENT
1. Machine Foundation Size: 3.5 x 2 m
2. Production Area: 7 x 5 m
3. Minimum Workshop Height: 3.0 m
4. Air Supply Requirement: 1.0m3/min, 0.6Mpa
5. Water Supply Requirement: 8 Tons
6. Machine Power Consumption: 32.5 KW
7. Production Line Power Consumption: 45 KW
8. Whole Line Electricity Arrangement: 250 Amps
9. Minimum Workers Number: 2 Workers
|
MACHINE FEATURES
► Control Unit: WISETECH total machine programmable controller
controller and ture colorful touch panel. English parameter process
setting, state monitoring and products counting are convenient and
intuitionistic. PLC automatic temperature control model.
► Hydraulic Unit: It adopts international famous Japan YUKEN brand
hydraulic valve and seal, proportional control. And has features of
high stationarity and reliability, accurate operation, long
longevity, quick response and so on.
► Extrusion Unit: Hard gear surface decelerator; famous Delta
inverter adopts Italian technology; Screw speed regulation adopts
variable-frequency speed regulation control system. It has the
features of stable rotate speed, powerful power, energy-saving and
so on. Mixing screw has wide applicability to raw materials and the
plasticization quality is even better. Energy-saving machine barrel
and A-alloy heaters are adopted for heating
► Die Head Unit: With single cylinder material-center-in
accumulator head, is smooth and dependable. This die head adopts
German technology and is made by special imported steel.
► Clamping Unit: Adopts fixed mould open-closing system,fast and
balanced.
► Blow Fitting Unit: Down blowing fitting is equipped.
► Lifter Unit: Four turbine reducer liter, lifting balance, quick,
stable.
► Electrical Components: All of the electrical components are made
in Japan and Taiwan.
We are professionally working for the Extrusion Blow Molding
Machine in design, manufacturing, exporting and service, owning
more than 15 years working experience. Our production line covers
0~1000L EBM machine models for different products, with rich
experience for transparent view stripe, multi-layer co-extrusion,
multi-cavity high speed machines, servo motor energy saving
application, special plastic material processing and abnormal
products machines with individualized design and manufacturing.
In oversea market, our machines cover Asia, Europe, Africa and
South America.We also provide blowing moulds, auxiliary machines
and post processing tools & devices to help our customers to
arrange the whole producing line’s layout, workshop management and
working flow. Our team keeps developing through the new technology
application and new design performing, keep making efforts for one
stop service to benefit more customers.
