1 Liter Hdpe Jerry Can Blow Moulding Machine 1 Year Guarantee
SRB70D-3, 500ml Round Plastic Container Making Machine, 1L PE PP
Small Bottle Blow Molding Machine
QUICK VIEWS
1. SRB70D-3 specially used for PE & PP bottles, jerrycan, kettles,
containers and jars, output >800 BPH.
2. Machine total control system with convenient operation page
design suitable for remote technical support.
3. Adopt pressure / flow double proportion control for hydraulic
system, insure platen moving speed & smoothness.
4. Aluminum cantilever box, product guidance shelves, scraps
sliding channels to convenient actual production.
|
TECHNICAL PARAMETERS
| Machine Model | Double Station Extruder Blowing Machine |
| Max Product Volume | 1 L |
| Machine Weight | 5.5 Tons |
| Machine Size | 3.8 x 2.2 x 2.5 m |
| Screw Diameter | 70 mm |
| Plasticizing Capacity | 90 KG |
| Clamping Force | 68 KN |
| Platen Size | 320 x 390 mm |
| Platen Opening Stroke | 150~500 mm |
| Max Mould Size | 360 x 360 mm |
| Triple Head Central Distance | 110 mm |
| Max Product Diameter or Width | 85 mm |
| Material Cutting Method | Hot Cutting |
| Max Die Diameter | 100 mm |
| Total Power | 48.5 KW |
| Average Energy Consumption | 32.5 KW |
PRODUCTION ARRANGEMENT
1. Machine Foundation Size: 3.5 x 2 m
2. Production Area: 7 x 5 m
3. Minimum Workshop Height: 3.0 m
4. Air Supply Requirement: 1.0m3/min, 0.6Mpa
5. Water Supply Requirement: 8 Tons
6. Machine Power Consumption: 32.5 KW
7. Production Line Power Consumption: 45 KW
8. Whole Line Electricity Arrangement: 250 Amps
9. Minimum Workers Number: 2 Workers
|
PRODUCTION FLOW
The working flow of 5L double station plastic container
manufacturing machine production flow is basically like this. The
PLC in the electronic control case sends the instruction, the
hydraulic system receives the instruction, the fuel tank and the
motor start to operate, drives the screw to run, and extrudes the
embryo through the die head. The opening and closing mold begins to
be closed, the needle is blown, cooled, and plastic products are
formed.
MACHINE ADVANTAGES
1. Our continuous extrusion blow moulding machines cover 0~30L
bottles, jerry cans, jars, containers, kettles, small toys, pipes
and other hollow articles. Based on your capacity requirement, we
can adopt single head, double head, triple head, four head and six
head with good material runner design.
2. According to your demand of packing objects and cost control,
our machine can be made with co-extrusion of 2~4 layers and view
stripe line. The design concept of us to 0~30L machine is stable
working performance, fast production speed, higher automatic degree
and lower fault rate.
3. Total machine control system well match with scraps on-line
deflashing, neck rotary cutting, in-mould labeling, leakage
testing, product conveying & packing. Optimized hydraulic system
with reasonable design to control pressure and flow of double
proportion, acchieve action execution fast, stable and accurate. High hardness bimetallic screw with good structure design and
modulation, insure bigger plasticizing capacity, less wearing and
longer working lifespan.
4. Rich experience in whole producing line arrangement and layout,
totally automatic running from material feeding to finished product
packing. Colorful touch screen, aluminum cantilever operation box,
bottle collective guidance shelves, scraps sliding channel and
safety protection are included.
