| Failure | Reason | Solution |
| Machine does not display after being connected to power | Loose connection of the plug | Check the plug again and the connection of the joints |
| Broken fuss | Change the fuss |
| The pilot lamp lights up but the digital tube Of the main unit does
net show the fore setting time | Abnormal Power supply | Plug to the right Power supply |
| Circuit damaged | Send the product back to the factory or distributor to repair |
| No image is taken while the counting down works | Connection problem with the Main unit and the Ball head | Send the product back to the factory or distributor to repair |
The remote control does not work Within the normal distance | Battery low | Change for new batteries |
| Damage in the remote control | Change for a new remote control or sent it for a repair |
| The time setting does not work | Error in the control program | Re-start on the machine |
| Problem with the SET button | Send it for a repair |
| No counting down after press Start | The pilot lamp light is on for the SET | Shut down the SET mode |
| Blurred film | The film,tooth,and ball head are not stable while taking a picture | Operate again rightly |
| The film is too far from the tooth that is taken a picture | Operate again rightly |
| Wrong angle of taking a picture | Operate again rightly |
| The image is too light | The time of exposure is too short | Reset the exposure time and make it longer |
| The time of developing the film is too short | Lengthen the developing time |
| The image is too dark | The time of exposure is too long | Reset theexposure time and make it shorter |
| The time of developing the film is too long | Shorten the developing time |
Other possible reasons for a Blurred film or a blank film | The film is of poor quality | Change for a better film |
| The imaging liquid is of poor quality | Change for a better liquid |
| The temperature is too low while developing the film | Develop the film In a higher temperature |
