BLX-10 Portable Wireless Dental X-Ray Unit Low Radiation Dental
Mobile X-Ray Machine
Product Parameters:
a) The rated parameters of x-ray production device
◆Tube voltage: 70kv (fixed)
◆Tube current: 1MA (fixed)
◆High voltage generating circuit: High frequency switch
◆X-ray control method: Microprocessor control
◆Time setting range: 0.05-1.2 seconds
- Weight: 1.95kg
- Size: 215*140*160 mm
- X-ray tubing
◆Type: bipolar fixed x-ray tube
◆X-ray tube Model: DG-073B-DC
◆The size of x-ray tube focal spot: 0.3*0.3mm
◆ANODE heating unit: 8.5Khu
◆Maximum tube voltage: 75Kv
◆Target angle: 21°
◆Total filtration: 1.6mmAL (Origin filtration: 0.8mmAL, Additional
filtration: 1mmAL)
◆X-ray irradiation range: 73mm (roundness)
e) Useage voltage: battery DC16.8V
f) Charger: Input AC100-240V, Output: DC16.8V
Method of usage:
1.Upon receiving,open the box and check the product for possible
damage during shipping. |
| 2. Make sure the fittings on the encasement list are packaged
within the box. |
3. Install the blue ray tube to the foreside of the ball head,then
tighten it. |
| 4. Turn on the Power；the pilot lamp will be light up. |
5. Press on the button of power, then LCD display the “READY”. Now
the equipment is in standby mode. (If there is abnormal, the LCD
will show the “ERROR”) |
| 6. When the machine under the “READY”, press on the button, then it
will show the falshing pictures of teeth. The LCD displays the
pictures of sixe parts’ teeth in palate and mandible contains
anteriors, canines and molars. |
| 7. During using the soft-switching, it can not change the setting
procedure and need to use the main power to reset. |
| 8. After adjusting the model, press on the start key and begin to
take a photo. (Notice: gently press 0.5 sec to turn it on) |
9. Turn the power off when the work is finished,press POWER, making
sure the pilot lamp is off.Don't keep the machine long in standby
mode. |
Preface:
This operation instruction includes usage and technical content of
portable x-ray system. In order to operate the machine and ensure
the safety, it is used by the law qualified personnel.
a) Noitce
Consider the radiational danger for the patients and the users,
please ensure the safety and comply with the content of
instructions.
b) Introduction
This product is the equipment combined with the high frequency
switch DC 70KV tube voltage and 1mA tube current X-ray, which can
be taken a photograph in the arm or solid and can be used with
digitized sensor and film x-ray system.
c) Product Feature
1. The product is adopted by the micro-processor for processing the
high-frequency switching start from little Ripple amount DC high
voltage to draw stable x-ray output, thereby obtain high-resolution
images.
2. The machine takes advantage of stable high-efficiency DC high
voltage and takes a photograph with small amount of X-ray, which
reduces the X-ray irradiation dose for the patient and user.
3. Multilayer X-ray shielding, give full consideration to the
safety of users.
