POE-S104FB
4 Port IEEE 802.3af 10/100Mbps 15.4W POE Switch
1 Port 10/100Mbps RJ45 Uplink, 1.0Gbps Backbound Bandwidth
48V/1.5A Built-in Power Supply
POE-S104FB, 4 Port 10/100Mbps PoE Switch with built-in power
adapter, it greatly reduces the cost of equipment and installation
by transmitting data and power over existing Ethernet cables. This
4 ways unmanaged Switch has 4 10/100Mbps PoE ports which supply
15.4W power each port for devices such as Security IP Network
Camera, Wireless Access Points, and VoIP Phone, etc. POE-S104FB is
also rack mountable Power over Ethernet Switch that powered by
internal power supply. It base on Auto sensing technology that
delivers 15.4W to IEEE802.3af PoE-Enable devices. What's more, It
also reduces energy consumption around 75% when the POE Switch is
in idle situation. It highly improve office efficiency and reduce
network congestion with total amount 1Gbps switching capacity. LED
indicators shows connected device status for efficient
troubleshooting.
Main Feature
1. IEEE 802.3af Power over Ethernet PoE compliant
2. Supports 10/100Mbps fast Ethernet
3. 4×100M bit Auto-MDIX PoE ports
4. Internal power supply
5. Provides up to 15.4 watts for PoE
6. Automatically detects the PoE class level of a Powered Device
7. 1Gbps bandwidth
8. Forwarding rate: 100 Mbps/148,800 pps; 10 Mbps/14,880 pps
9. Status LEDs: System Power, PoE, 100 Mbps, and Link/Activity
10. Full wire-speed non-blocking reception and transmission
11. Store-and-forward switching method
12. Back pressure Flow Control for Half-Duplex mode IEEE 802.3x
Flow Control for Full-Duplex mode
13. Power saving technology powers down unused ports that connected
with device are in standby mode
14. Plug and Play
15. Sturdy rack mountable metal case
16. Easy installation and use, no need to convert by software and
network protocol
17. One year limited warranty
Detailed Specification
Item: 4 Port Power over Ethernet Switch (15.4W PoE)
Model: POE-S104FB
PoE Pin: 1,2 power "+"; 3,6 power "-"
Protocol Standard:
IEEE 802.3 10Base-TIEEE 802.3u 100Base-TX
IEEE 802.3ab 1000Base-T
IEEE 802.3af Power over Ethernet (PoE)
IEEE 802.3x Flow Control
Out Interface: 4×100M bit Auto-MDIX PoE / PoE+ RJ-45 ports
Data Rate: 10/100 Mbps (Half / Full Duplex, Ethernet)
Forwarding Rate: 100 Mbps/148,800 pps, 10 Mbps/14,880 pps
Data RAM Buffer: 96 K bytes
Address Table: 2 K MAC entries
Switch Fabric: 1Gbps
Power Supply: 100-240 V, 50/60 Hz, 48V/1.5A(Internal)
Diagnostic LED Lights: Power, PoE, Link / Activity
Power Consumption:
Built-in power adapter
Min: 8 Watts (standby), Max: 72 Watts
PoE Max: 60 Watts (4×15 watts PoE devices connected)
Ambient Temperature:
Operating: 0° ~ 45°C (32° ~ 113°F)
Storage: -20° ~ 90°C (-4° ~ 194°F)
Operating Humidity: Max 90% (non-condensing)
Safety Approved: CE, FCC, ROHS
Dimensions: 140mm × 91mm × 28mm
Net Weight: 0.85 kg
