POE-S204F
4 Port IEEE802.3af 10/100Mbps 15.4W POE Switch
2 Port RJ45 10/100Mbps Uplink
1.2Gbps Bandwidth
48V/1.25A External Power Supply
POE-S204F, 4 Port Power Over Ethernet Switch, it can automatically detect and supply power to all the IEEE
802.3af compliant Powered Devices (PDs), there is total 6
10/100Mbps Auto-Negotiation RJ45 ports, including 4 PoE (Power over
Ethernet) ports and 2 Non-POE Uplink Ports, the transmission
distance of power supply is 100 Meters. There has an intelligent
detection when power up, so no matter the Powered Device is
PoE-enable or PoE-disable, no device will be broken as the PoE
intelligent power solution. It will be power off when the PoE
Devices is disconnecting. In this situation, the electrical power
is transmitted along with data just in a single cable that allows
you to extend your network where there are no power lines or
outlets and there you wish to install devices such as CCTV Digital
IP Camera, Wireless Access Points (AP), VoIP Phone, Portable
Device, etc.
Main Features:
1. IEEE 802.3af Power over Ethernet PoE compliant
2. Supports 10/100Mbps fast Ethernet
3. 4×10/100Mbps Auto-MDIX PoE ports
4. 48V 1.25A power supply
5. Provides up to max 15.4 watts for PoE
6. Automatically detects the PoE class level of a Powered Device
7. 1.2Gbps bandwidth
8. Forwarding rate: 100 Mbps/148,800 pps; 10 Mbps/14,880 pps
9. Status LEDs: System Power, PoE, 100 Mbps, and Link / Activity
10. Full wire-speed non-blocking reception and transmission
11. Store-and-forward switching method
12. Back pressure Flow Control for Half-Duplex mode
13. IEEE 802.3x Flow Control for Full-Duplex mode
14. Power saving technology powers down unused ports that connected
devices are in standby mode
15. Plug and Play
16. Sturdy rack mountable metal case
17. Easy installation and use, no need to convert by software and
network protocol
18. One year limited warranty
Detailed Specification
Item: 4 Port Power over Ethernet Switch (15.4W PoE)
Model: POE-S204F
PoE Power PIN: 1,2 Power "+"; 3,6 Power "-"
Prototol Standard:
- IEEE 802.3 10Base-T
- IEEE 802.3u 100Base-TX
- IEEE 802.3ab 1000Base-T
- IEEE 802.3af Power over Ethernet (PoE)
- IEEE 802.3x Flow Control
Interface: 4×100M bit Auto-MDIX PoE / PoE+ RJ-45 ports
Data Transfer Rate: 10/100 Mbps (Half / Full Duplex, Ethernet)
Forwarding Rate: 100 Mbps/148,800 pps, 10 Mbps/14,880 pps
Data RAM Buffer: 96 K bytes
Address Table: 2 K MAC entries
Switch Fabric: 1.2Gbps
Power Supply: Input:AC100-240 V, 50/60 Hz, Output: DC48V, 1.5A
Diagnostic LED Lights: Power, PoE, Link/Activity
Power Consumption:
- Min: 8 Watts (standby)
- Max: 72 Watts
- PoE Max: 60 Watts (4×15 watts PoE devices connected)
Ambient Environment:
- Operating: 0° ~ 45°C (32° ~ 113°F)
- Storage: -20° ~ 90°C (-4° ~ 194°F)
- Operating Humidity: Max 90% (non-condensing)
Safety Approved: CE, FCC, ROHS
Dimensions: 140mm×91mm×28 mm
Weight: 0.85 kg/piece (N.G.)
