Blue Orange Material Handling Racks Drive Through Racking For Cold
Storage
Description:
1. Drive in rack consists of the following main parts and auxiliary
parts:
Main parts: Uprights, horizontal braces, diagonal braces, beams,
frame spacers, arms, guide rails
Auxiliary parts: base plates, shim plates, column guards, guide
rail splices, bolts and nuts, top cross bracings, lateral cross
bracings, etc.
2. Goods can be stored and taken out from one side or both side, we
call single sided or double sided drive in rack according to the
actual storage area. In normal cases, goods will go in first and go
out last (FILO).
Specifications:
| Technical Parameter for drive in rack | Size | All dimensions available, and depend on the actual condition in the
warehouses and distribution centers |
| Function | Storage of goods with few varieties but large quantities |
| Applicability | For goods packed by pallets |
| Load capacity | 500 ~ 2000 kg per pallet |
| Adjustable spacing | 50mm, 50.8mm, 76.2mm |
| Design | Forklifts go through each tunnel type lane of the drive in rack to
pick up or take out the goods or products |
| Life | Steel members can be used for a long time |
| Precautions | Extreme careful operation of the forklifts, no impact from the
forklifts to the pallet rack, and no impact between pallet and
racking |
| Storage temperature | - 25 ~ +45 Celsius degrees |
| Environment | Ambient temperature. Special attention should be paid for the cold
or high temperature, or with high corrosion |
Drive in racking:
Racking components can be assembled and disassemble quickly with on
the detailed assembly drawing and simple instructions. For HUADE
automated storage systems, we supply not only the systems, but also
the electric control system and software WMS to optimize the space
and enhance the management level in the warehouses.
Competitive Advantages:
HUADE was founded on 1993. Previously HUADE focuses on
manufacturing all types of racking system and shelving system.
After years of industrious efforts on design, workmanship of the
storage system, because of the era of automation coming, with a
team of professional engineers, we are one of the earliest
manufacturers devoting ourselves to the automated storage systems.
We are not only providing most versatile racking systems, but also
supplying semi automated and fully automated storage systems.
With 66,000 square meters of area in the factory, we can produce
all the products quickly and send them immediately
