Customized Hot runner brass nozzle heater pressed with thermocouple
Description:
1) GME Band heaters can be found in several types of dimension,
wattage, voltages and material. Mica band heaters are an
inexpensive industrial heating solution that surrounds pipes and
tubes that require external indirect heating.
2) Pipe heating, drum heating, barrel heating normally used for
oils, lubricants or any other circular applications. Band heaters
use electric heating elements (NiCr wire) to heat-up the external
surface of drums or pipes for a gradual heat transfer.
3) Industrial band heaters can be made with terminal boxes or
moisture resistant terminal boxes that protect terminations and
have the option of a thermostat or thermocouple digital temperature
controllers to help control and regulate an applied heat.
Specification:
1.Sealed band heater in brass, with folded ends.
2.Band heater connection, waterproof technology.
3.Electric insulation by mica plate.
4.Connection: nick core, fiberglass insulated+earth wire, protected
by a galvanized steel braid.
5.Max watt density: 5W/cm, (Wattage tolerance: +5%-10%)
6.Diameter: 25-150 mm
7.Height: 25-70 mm
8.Max. operating temperature over the surface of the heater 340
℃,depending on working conditions.
| Sheath Material | Chrome Nickel Steel
| | Insulators | High Grade Steatite Ceramic Insulators (High temperature)
| | Heat Saving Thermal Insulation | Ceramic Fibre (std.)
| | Heating Elements (coil) | NiCr 60:16, NiCr 80:20
| | Nominal Wall Thickness | Premium Heat : ½" Power Saver : ½" + 5/8" (Outer Insulation) Power
Saver PLUS :½" + 1.5" ( Outer Insulation)
| | Connection | Fiber Glass Insulated- Metal Braided Flexible Cable (std. 12" long) mounted on rigid screw post terminals
| | Voltage Range | 110V - 440V, Single
| | Surface Loading | 35-55W / inch2 (depending upon model & application)
| | Power Rating | Depending upon application
| | Power Tolerance | ± 10%
| | HV Testing | 1.5 Kv between heating element and sheath
| | Insulation Resistance (Cold) | < 20 MΩ
| | Sheath Temperature | Up to 500°C maximum (Chrome Nickel Steel sheath)
| | Gap Between the Clamping Edge | 5 - 10mm
| | Resistance | +/- 10%
| | Width : | Minimum 30mm and there after multiples of 15mm. Minimum 100mm in
case of Power saver & Power Saver PLUS
| | Inner Diameter | Minimum 50mm Minimum 75mm incase of Power saver & 100mm for Power
Saver PLUS
|
|
Application:
Injection molding
Blow-molding
Plastic extrusion
Container, pipe, or tank heating
Pharmaceutical applications
Applications in the food industry
Extruder barrel & die heaters
Hot runner mould systems
The industry
Shoes manufacturer
Semiconductor electric welding
Die casting
Engineering industry
packing equipment
water heating and injection
refrigeration
Payment Terms and Shipping:
1) TT Bank
2) Western Union
3) PayPal
