Polished Machined Metal Parts Silver Stainless Harden Parallel Pin
M6 for Spring Loader
Stainless steel parallel pin is a straight shaft with chamfered on
both ends , it is used to spring loader assembly . parallel pin
machining part is made from stainless steel 430 that with good
features
Wear resistance
Good heat conduction
Heat resistant
Perfect corrosion resistant
| Fusing point(℃) | 1427 |
| specific heat capacity(0~100C,KJ·kg-1K-1) | 0.5 |
| Heat conductivity(W·m-1·K-1) | (100℃)15.5 |
| Resistivity(20,10-6Ω·m) | 0.73 |
| Tensile strength σb (MPa) | 480 |
| Yield Strength σs (MPa) | 205 |
| Elongation δ5 (%) | 22 |
| Density g/cm3) | 7.75 |
Specification for parallel pin machining part
| Length | 6 |
| Diameter | 20 |
| chamfer | 0.5 x 45° |
Unit : mm
Tolerance for Parallel Pin Machining Part
| Level | Tolerance |
| 0.5～3 | >3～6 | >6～30 | >30～120 | >120～400 | >400～1000 | >1000～2000 | >2000～4000 |
| f | ±0.05 | ±0.05 | ±0.1 | ±0.15 | ±0.2 | ±0.3 | ±0.5 | - |
| m | ±0.1 | ±0.1 | ±0.2 | ±0.3 | ±0.5 | ±0.8 | ±1.2 | ±2 |
| c | ±0.2 | ±0.3 | ±0.5 | ±0.8 | ±1.2 | ±2 | ±3 | ±4 |
| v | - | ±0.5 | ±1 | ±1.5 | ±2.5 | ±4 | ±6 | ±8 |
Parallel pin tolerance based on f level .
Stainless steel parallel pin machining parts are polished for
bright surface and enhance corrosion resistance .
| Polishing | Grey | 0.01mm ( reference ) | Improving brightness of surface |
Characteristics for parallel pin machining part
※ Bright surface
※ High Precision
※ Perfect fineness
※ No Burrs
※ Good corrosion resistance
※ Environmentally-friendly
※ Super materials
※ Strict dimensions
Extra finish for parallel pin machining part
Zinc
The most popular plating for the most products , making parts are
bright and smooth and resistant corrosion
Nickel
The film thickness is 1～3μm , it improves brightness and wear
resistance . it is for the most items .
Tin
With film thickness 0.13～1.27μm , tin finish with bright surface
and good ductility ,corrosion resistance ,lower melting point
,eco-friendly features . and is used for electronics .
Brass
Usually, 5gm～8gm finish coating thickness and with good
dispersibility ,Bright appearance .
Chrome
Chrome finish is silver white color and the thickness of film is
0．25～0．5μm normally . chrome finish has many practical Features
like Bright appearance ,Wear resistance ,Corrosion resistance ,Hard
plating film ,Heat resistance ,Application and is applicable for
Decorative parts,Various instruments ,gears and shafts
etc,Automotive ,fastener and so on .
