Blind Ultrasonic Cleaner Double Tank Air Bubbles Rinse Strong Power
with Filtration System
With experiences with cleaning, traditional cleaning method of
blind is time cost and may not clean thoroughly.
Limplus blind ultrasonic cleaner is welcomed by customers and part
of them provide cleaning service to local customer. And length
2.2meter, 3meter are most popular tank size for blind clean.
Usage of blind which need clean normal:
Hospital / Clinical unit / food industries / educational sectors / offices / residential
apartments
It induces a germfree ambience, and assures a splendid look to a
house and office.
A regular cleaning increases the longevity of your blinds.
Advantages of blind ultrasonic cleaning:
1. minimize the use of manual labor
2. Clean hard to reach areas of products and remove all types of
dirt.
3. Expand your current business via provide cleaning service to
customers.
4. Save time and labor cost, make hands free.
5. Extend the life of blinds.
6. Accomplish the cleaning task within seconds, only 15~30seconds
per blind.
Specification: (Othe size also can be design based on requirement)
| Model No. | LS-7202 (With double tank) |
| Ultrasonic Tank | 3000x220x500mm |
| Rinsing Tank | 3000x220x500mm |
| Unit size | 3200x680x950mm |
| Wooden case size | 3300x750x1100mm |
| Ultrasonic Power | 3600W/ultrasonic tank |
| Heating power | 15KW total |
| Timer: | 1~99min adjustable |
| Frequency | 40KHz |
| Ultrasonic Tank capacity | 330L |
| Optional | Drying rack, Drying tray, Air bubble |
| Tank material | SUS304, T=2.0mm |
| Warranty time | 1 year |
FAQ about Limplus blind ultrasonic cleaner
Q.: How to make money via Limplus ultrasonic cleaner?
A.: All of our blind cleaners with castor, can be move to anywhere
you need. you can provide removable service to customers.
Q.: What is the purpose of the unit heater?
A.: The primary purpose of the unit heater is to maintain the
solution temperature between cleaning cycles. The tremendous energy
released by cavitation generates heat for cleaning.
Q.: When should I change the solution?
A.: Cleaning solutions should be replenished when a noticeable
decrease efficiency, or if the solution is visibly dirty. A fresh
batch of solution for each cleaning session is optional.
