Extruded Magnesium Ribbon Anode AZ31 High Potential for Oil and Gas Pipe Cathodic Protect

Extruded Magnesium Ribbon Anode AZ31 High Potential for Oil and Gas Pipe Cathodic Protect

magnesium anode zinc ribbon anode

Magnesium anodes have the highest protection capability of any galvanic material. While these anodes are most commonly used in the cast form, certain structures can be more efficiently protected through the use of extruded magnesium configurations. Extruded magnesium anodes have high surface and length ratios in relation to cross sectional size. This allows these anodes to deliver a higher current per weight than standard cast magnesium anodes. By supplying more current, extruded anodes can deliver effective protection to structures buried in high resistivity soils.

HB offers a full-line of extruded magnesium anodes in both rod and ribbon forms. Rod anodes are available in an alloy providing 1.4-1.5 volts driving potential (Galvorod). They are furnished with a variety of connection options and offered in numerous diameters. Ribbon anodes are manufactured in 3/8" x 3/4" flexible coils which can be easily shaped for use on a multitude of protection applications. The ribbon anodes are manufactured in a high potential alloy (Galvoline) providing 1.6- 1.7 volts driving potential.

Both rod and ribbon anodes are manufactured with a solid steel core in the center of the anode. This core distributes current uniformly through the anode to prevent excessive discharge near the connection end.

Applied Magnesium research and development in galvanic anodes began in 1939, and by 1949 Applied Magnesium had introduced extruded magnesium anodes for use in water heaters. As time went on, Applied Magnesium learned more about the advantages of anodes with small diameters and high current output to weight ratios, and identified several other applications for extruded anodes. Today, Applied Magnesium offers a complete line of extruded anodes for specialized cathodic protection applications.
There are four primary areas where extruded anodes offer important advantages in cost, performance, and ease of installation:

1. Water heaters and water storage tanks, where a small diameter anode simplifies installation.
2. Steel located in high resistivity electrolytes, where a small diameter anode gives a desirable current output to anode weight ratio.
3. Gas service entrance piping, where a small diameter anode can be driven into the ground to provide convenient and inexpensive protection.
4. Prepolarization of structures in seawater, where a small diameter anode gives short-term, high-current output.

1) Magnesium Casting Anode
Grade: AZ63, AZ31, MGM1C
Main application: Sacrificed magnesium anode suitable applies in the fields of anticorrosion. Such as: Oil, gas, water transmission in underground or fresh water, underground cable, chemical, communication, bay, watercraft and reservoir strobe.
2) Magnesium extruded anodes
Grade: AZ63, AZ31, MGM1C
Main application: Water heaere, water container, pre-polarization of steel structure in seawater, gas pipe, anticorrosion of steel and iron structure where high resistant and electrolyte (soil and water) existed.
3) Ribbon Anode
Main application: Ribbon anodes are used for the cathodic protections of sleeved pipings, tanks and pipe networks ad grounding grids guarding against heavyy current interfereence. And temporaly cahodic protection of pipings.
4) Aluminum Anode
Type: AL-Zn-In-CD AL-Zn-In-Sn Al-Zn-In-Si
Main Application: Aluminum anodes are suitable for the cathodic protection for such metal structures as ships, machinery, offshore engineering, harbor facilities, and pipings and cables in an ooze corrosion environment.
5) Zinc Anode
Main Application: Zinc anodes are sitable for the cathodic protection for ships machinery, offshore engineering and harbor facilities in seawater and fresh seawater andd for pipes and cables embeded in soil with cower resistivity.
6) High Silicon cast iron anode
Type: High silicon cast iron Cr-containing silicon iron
Main Application: It is widely aplied to the impressed current cathodic protection of oil drilling platform at sea. Bried pipings anad cables under ground.

Usage: Magnesium Sacrificial Anode has a very wide protection in vessels, ports constructions, ocean projects, underground cables, gas and water supply systems, drainage lines, chemicals, telecommunications, water boiler, heat exchanger, vapourater, etc.
Al-Zn-In alloy sacrifical anode is applied for the cathodic protction of vessel, mechanic equipment, Ballast Tank, tank inner, seashore facility, seabed pipeline, dock steel peg, ocean platform and cable ect. Which applied for the seawater as the medium.
NOTE: If there is no the size which you need, please give us your Drawing and the size of the anode, we will make the anode by your information.

May you have interested in

Zinc Alloy Sacrificial anodes are used in applications for protecting the pipelines and marine structures from corrosion in seawater and saline mud. Zinc anode also suitable for the protection of storage tanks, fishing boat, submarine, stern drive and offshore platform, etc.
Specification:

China Hunan High Broad New Material was founded in 2006, focus on the business in advanced new material and service. Including: design, installation, material , engineering, maintenance and technical support.

Our sales office located in Changsha, Hunan province, plant located in Hunan,Shanxi, Henan,Guizhou province.Our business scope including : Cathodic protection products for fresh water and marine anti-corrosion products such as magnesium anodes,Aluminum anodes ,Zinc anodes etc.;Master alloy for aerospace ; Aluminum alloy , Magnesium investment castings industry; Magnesium alloy profile :Extrusion/hot rolled billet, plates,bars etc .for various civil & military industry,such as grade AZ31B,AM80,WE43,ZK60 etc.; high wear-resistance & hardness ceramic products for sandblasting nozzle & bulletproof plate for armor vest, armor vehicle.

Along with strong economic development  in China, we expand our business very well, Product capacity is over 5000mt per year.Turnover reach to USD20,000,000.00 per year.

Our Products are widely accepted and recognized by clients worldwide including Europe, North America, East Asia, Middle east etc..

Our R&D department have strong technical design capacity. We closely cooperated with colleges and universities, supply the service for various companies in China and overseas.

Believe we can be your long term and reliable supplier .