Manual Trolley Movable Hydraulic Fit Up Rotator For Wind Tower
Growing Line
Brief introduction:
HGKZ series hydraulic fit up rotator has simple structure but high
efficiency of completing the pipeline fit up procedure.
Normally it co work with welding rotator which the power rotator
provide power to drive the roller rotate.
Video link of Pipe growing line & fit up solution
https://youtu.be/vFC1BDvJgHc
Welcome to follow us on following social media:
Facebook: https://www.facebook.com/weldingrotatorcn
LinkedIn: https://www.linkedin.com/in/automatedwelding
Feature:
- Hydraulic fit up rotator is composed of two pieces of distance
adjustable rotators, electric system and hydraulic pump.
- There are two sets of roller mechanism installed on rotator
base.Each roller mechanism has a PU roller.Roller distance could be
regulated by hydraulic cylinder, so as to adjust the vessel
position in three dimensional to fit up the vessel effectively &
quickly.
- Rotator base is made of welded plate,with feature of high strength
to make sure no deformation in long period using span.
- Rotator base & boring is integrated process,so as to guarantee the
roller rotating precision.
- Roller surface is enclosed PU cover which material is imported. It
enlarged contact surface,enhanced using life. Roller steel core
processed by unique working craft,the coated PU will keep away from
peeling off issue.
- Completed structure is processed by temper destressing.It will be
pre-treatment before painting, one layer of zinc rich primer,two
layer of polyurethane finish.
- Electric system is composed of electric cabinet & remote control
box.
Main Technical Parameters
| Model | HGKZ-5 | HGKZ-10 | HGKZ-20 | HGKZ-40 | HGKZ-80 | HGKZ-160 |
| Max.Load capacity(ton) | 5 | 10 | 20 | 40 | 80 | 160 |
| Vessel dia. Range (mm) | 250~2300 | 320~2800 | 500~3500 | 600~4200 | 800~5000 | 1000~6000 |
Dia.& width of roller (mm) | 250X120 | 300x140 | 350x160 | 400x180 | 450x2x200 | 500x2x260 |
| Adjustable mode | Two hydraulic cylinder independent adjustment |
| Motor power (kW) | 0.37 | 0.55 | 1.1 | 1.5 | 3 | 4 |
| Roller speed (m/min) | Idler without power |
Product description:
- This fit up rotator is mainly used for cylindrical(or low angle
taper)work piece fit up welding.
- Two rotators regulate the roller rack center distance independently
by bidirectional hydraulic cylinder.
- Thereby, it could regulate the tower displacement on
vertical,horizontal or even inclined direction,so as to make the
tower sections fit up.
- The fit in sections are conveyed backward by movable
rotator.Another section will be placed in front of the fit in
section.
- Meanwhile welding the inner & outer circumferential seam.
- Repeat above procedure to complete the whole cans fit up.
- It is the optimal equipment to increase production
efficiency,insure production quality & decrease labor working
intensity.
Application:
- Pressure vessels
- Pipe manufacturing industries
- Wind power fabrication
- Chemical & fuel storage tank fabrication
- Any heavy cylindrical job
Delivery picture:
Name of the machine:
welding rotator, pipe welding rotator, pipe turning rolls, welding
turning rolls, welding roller, tank turning rolls, pipe turning
rolls, tube turning rolls, fit up rotator, self-aligned welding
rotator, self-aligning welding rotator, self adjustable welding
rotator, self aligned roller stand, wheel frame, roller frame for
wind tower welding, automatic adjustable welding pipe rotator,
conventional welding rotator, bolt adjustable welding rotator, sand
blasting rotator, painting rotator, 1+1 hydraulic fit up rotator,
two in one fit up station
