15W G Thread FP55 Pneumatic Pulse Valve Normal Close For Dust Clean
System
The electromagnetic valve, pulse jet valve, for dust collector, has
two gas route inside, and controlled by solenoid pilot and coil to
open and close. Because of excellent design, the diaphramgs valve
has good characteristic of air flow, the pressure can be ensure no
reduced. Turbo pulse valve can open by fast speed, about
0.023-0.027seconds, and can close fastly to blow big pressure to
remove dust.
The turbo valve is assembled with top end cap and bottom end cap,
all is made from aluminum die-casting, and is fastened by SS304
screws.
The pulse valve can be divided into two types, bellow 1 1/2" is
single diaphragm valve, and above 1 1/2" is double diaphragm valve.
And the diaphragm is made of high quality fabric injected nitrile
material, ensure high and long working life.
The turbo pulse valve is assembled with solenoid coil, wich is made
of IP65 protection class material. And the coil can be turned by
360 degree, it is easy for user to install.
Advantages:
All turbo pulse valves are available in pneumatic and electric
version and in this last case turbo valves has an unique pilot
model for the entire range.
Complete range of high efficiency diaphragms pulse jet valve of
3/4", 1", 1 1/2", 2", 2 1/2", 3"
The pulse valve has been developed in order to optimize cleaning
systems with quick opening and closing
times that allow to obtain high peak of pressure inside filter
elements with a moderate air consumption, ensuring effectiveness
and efficiency.
Port Size: 2"
Type: Z type, 90 degree angle between inlet and outlet
Connecting pipe port out diameter: 88.90mm
Model Specification:
| Working pressure | 0.5 to 7.5bar |
| Working medium | clean, dry compressed air |
| Working condition | -40 to 100℃, use normal diaphragm -30 to 200℃ use high temperature diaphragm |
| Working voltage | AC, 24, 110, 23v/50-60hz, 19VA DC, 24v 15w |
| Insulation calss | F |
| Solenoid coil standard | IEC335 |
| Voltage tolerance | + - 10% |
| Installation of solenoid coil | 360degree |
| Protection class | IP65 |
| Type | Pneumatic or electric control |
| Open starting speed | 0.023-0.027seconds |
| Working life | More than 1 million cycles |
| Qty of diaphragm | 3/4" to 1" is single diaphragm valve, 1 1/2" to 4" is double
diaphragm valve |
| Note | Can install muffler to remove noise, the connecting thread is G3/8" |
Turbo Pulse Valve technical specifications:
| Working Pressure | Working medium | Voltage | Temperature range | Air relative humidity | Protection class | Diaphragm working life |
| 0.3-0.8MPa | clean air | 220V AC | NBR, Nitrile, -40-82℃ Viton, -29-232℃ | ≤80% | IP65 | More than 1 million times or more than 2 years |
| 0.3-0.8MPa | clean air | 110V AC | NBR, Nitrile, -40-82℃ Viton, -29-232℃ | ≤80% | IP65 | More than 1 million times or more than 2 years |
| 0.3-0.8MPa | clean air | 24V AC | NBR, Nitrile, -40-82℃ Viton, -29-232℃ | ≤80% | IP65 | More than 1 million times or more than 2 years |
| 0.3-0.8MPa | clean air | 24V DC | NBR, Nitrile, -40-82℃ Viton, -29-232℃ | ≤80% | IP65 | More than 1 million times or more than 2 years |
Overall Dimensions of turbo FP55 pulse jet valve
Pulse Valve Internal Structure and Main Parts:
| Part Name | Material |
| Solenoid coil | high quanlity enamelled wire |
| Armature assembly | SS304, 430FR |
| Small common cap | ADC aluminum |
| Diaphragm | NBR (nitrile, buna-n) |
| Top end cap | ADC aluminum |
| Big spring | SS304 |
| Screws | SS302 |
| Seal | NBR, Viton, all can be customized |
| Main body | ADC aluminum |
Advantages of turbo pulse valve:
1, Complete range of high efficiency diaphragms pulse jet valve of
3/4", 1", 1 1/2", 2", 2 1/2", 3"
2, suitable for all types dust collector
Welcome your enquiry, we also can OEM pulse valve as per your
special demands. You can call us, or email us, we will response at
once.
