DMF-Z-25 Electric / Pneumatic Pulse Valve 110V AC 0.3 - 0.8Mpa
Working Pressure
Dust bag pulse valve is widely used on applications of dust
cleaning from iron and steel metallurgy, cement, thermal power,
chemical industry, building, etc
With high function of capacity of dust cleaning.
Advantages:
All BFEC pulse valves are available in pneumatic and electric
version and in this last case bfec valves has an unique pilot model
for the entire range.
Complete range of high efficiency diaphragms pulse jet valve of
3/4", 1", 1 1/2", 2", 2 1/2", 3"
The pulse valve has been developed in order to optimize cleaning
systems with quick opening and closing
times that allow to obtain high peak of pressure inside filter
elements with a moderate air consumption, ensuring effectiveness
and efficiency.
Port Size: 1"
Type: Z type, 90 degree angle between inlet and outlet, easily for
installation air house and blowpipe
Model Specification:
| Working pressure | 0.5 to 7.5bar |
| Working medium | clean, dry compressed air |
| Working condition | -40 to 100℃, use normal diaphragm -30 to 200℃ use high temperature diaphragm |
| Working voltage | AC, 24, 110, 23v/50-60hz, 19VA DC, 24v 15w |
| Insulation calss | F |
| Solenoid coil standard | IEC335 |
| Voltage tolerance | + - 10% |
| Installation of solenoid coil | 360degree |
| Protection class | IP65 |
| Type | Pneumatic or electric control |
| Open starting speed | 0.023-0.027seconds |
| Working life | More than 1 million cycles |
| Qty of diaphragm | 3/4" to 1" is single diaphragm valve, 1 1/2" to 4" is double
diaphragm valve |
| Note | Can install muffler to remove noise, the connecting thread is G3/8" |
BFEC Pulse Valve technical specifications:
| Working Pressure | Working medium | Voltage | Temperature range | Air relative humidity | Protection class | Diaphragm working life |
| 0.3-0.8MPa | clean air | 220V AC | NBR, Nitrile, -40-82℃ Viton, -29-232℃ | ≤80% | IP65 | More than 1 million times or more than 2 years |
| 0.3-0.8MPa | clean air | 110V AC | NBR, Nitrile, -40-82℃ Viton, -29-232℃ | ≤80% | IP65 | More than 1 million times or more than 2 years |
| 0.3-0.8MPa | clean air | 24V AC | NBR, Nitrile, -40-82℃ Viton, -29-232℃ | ≤80% | IP65 | More than 1 million times or more than 2 years |
| 0.3-0.8MPa | clean air | 24V DC | NBR, Nitrile, -40-82℃ Viton, -29-232℃ | ≤80% | IP65 | More than 1 million times or more than 2 years |
Overall Dimensions of BFEC DMF-Z-25 pulse jet valve
Pulse Valve Internal Structure and Main Parts:
| Part Name | Material |
| Solenoid coil | high quanlity enamelled wire |
| Armature assembly | SS304, 430FR |
| Small common cap | ADC aluminum |
| Diaphragm | NBR (nitrile, buna-n) |
| Top end cap | ADC aluminum |
| Big spring | SS304 |
| Screws | SS302 |
| Seal | NBR, Viton, all can be customized |
| Main body | ADC aluminum |
Advantages of BFEC pulse valve:
1, Complete range of high efficiency diaphragms pulse jet valve of
3/4", 1", 1 1/2", 2", 2 1/2", 3"
2, suitable for all types dust collector
Welcome your enquiry, we also can OEM pulse valve as per your
special demands. You can call us, or email us, we will response at
once.
