Solid Wood Cutting Tungsten Carbide Blanks High Temperature
Resistance
Tungsten carbide rod shows all the superiorities of tungsten
carbide, such as good wear and corrosion resistance, high
toughness, etc.
Precisely speaking, its chemical composition is mainly tungsten
carbide powder, with Co or Ne as its binder.
Tungsten carbide rods with several TC Grades used for various
metals and non-metal cutting tools for such as drills, end mills,
reamers.
Also widely used in stamping tools and wear-resistant tools,etc.
Feature:
Tungsten carbide strip is mainly composed of tungsten carbide and
cobalt powder mixed by metallurgical methods, including powder
making, ball grinding, pressing and sintering. The main alloy
components are WC and Co. The contents of WC and Co in tungsten
carbide strip with different uses are not consistent, and the
application range is wide. Cemented carbide strip is characterized
by high red hardness, good weldability, high hardness and high wear
resistance. It is mainly used in the manufacturing of solid wood,
density board, grey cast iron, non-ferrous materials, cold hard
cast iron, hardened steel, PCB and brake materials.
| THICKNESS | WIDTH | LENGTH |
| Size | Tolerance | Size | Tolerance | Size | Tolerance |
| 1~3 | 0~+0.3 | 4~6 | 0~+0.2 | 5~30 | 0~+0.5 |
| 3~5 | 0~+0.4 | 6~10 | 0~+0.3 | 30~60 | 0~+1 |
| 5~8 | 0~+0.5 | 10~15 | 0~+0.4 | 60~100 | 0~+1.5 |
| 8~12 | 0~+0.8 | 15~20 | 0~+0.5 | 100-150 | 0~+2 |
| 12~15 | 0~+1 | 20~25 | 0~+0.8 | 150~200 | 0~+2.5 |
| >15 | 0~+1.2 | 25~30 | 0~+1 | 200~250 | 0~+3 |
| | 30~40 | 0~+1.5 | 250~300 | 0~+4 |
| | 40~50 | 0~+2 | 300~350 | 0~+5 |
| | 50~80 | 0~+3 | 350~450 | 0~+8 |
| | >80 | 0~+5 | >450 | 0~+10 |
| 1,The deformation amount of the plane of ordinary specifications is
no more than 0.3mm, and that of the side is no more than 0.5mm |
| 2,Thickness <2MM, width BBB 0 20MM, lateral deformation less
than or equal to 1MM |
When requesting for a quote specify:
1. Physical dimensions, and related tolerance ( if you have)
2. Grade, or chemical composition (WC: Wt% + Co: Wt% + Others :
Wt%) , and properties (Hardness, Density, coercive force, and WC
grain size), and associated tolerances, etc.
3. Operation condition and special requirement.
4. Surface condition: sintered blank, fine grinding.
5. Quantity needed.
Only in this way, we can judge and quote exactly on time.
