Standard Sizes Tungsten Carbide Blanks For Wood Working Wear
Resistance
Hard Alloy carbide blanks has high hardness and high wear
resistance, it is a ideal choice to used in cutting kinds of wood.
With high quality raw material and advanced equipment , G.S.carbide
provides customer superior quality carbide strips.
1. Easy to be brazed, good wear resistance and toughness.
2. Untrafine grain size raw material to keep excellent strength and
hardness.
3. Both standard sizes and customizes sizes are available.
About Standard Sizes Tungsten Carbide Blanks
The main composition of tungsten carbide bars or Hard Alloy carbide
blanks is tungsten carbide powders and cobalt powders .With its
wear resistant and corrosion resistant ability , tungsten carbide
nowadays is widely used in many areas such as : cutting tools ,
moulds , oil and automobile industry etc .
RX10 High hardness, suitable for roughing of iron, solid wood, dry
wood or nonferrous metal, ceramic and other alloys.
RX20 High toughness, easy to be brazed without heat preservation.
Suitable for rosewood, solid wood, pinewood, and other wood with a
lot stammer.
RX10T High hardness, suitable for finishing of iron, nonferrous
metal, ceramic and other alloying, semifinishing of of hardwood,
chipboard, MDF and HDF. Better to use silver soldering.
AB10 High toughness, difficult to break tooth. Special used for
finger jointing tool.
| THICKNESS | WIDTH | LENGTH |
| Size | Tolerance | Size | Tolerance | Size | Tolerance |
| 1~3 | 0~+0.3 | 4~6 | 0~+0.2 | 5~30 | 0~+0.5 |
| 3~5 | 0~+0.4 | 6~10 | 0~+0.3 | 30~60 | 0~+1 |
| 5~8 | 0~+0.5 | 10~15 | 0~+0.4 | 60~100 | 0~+1.5 |
| 8~12 | 0~+0.8 | 15~20 | 0~+0.5 | 100-150 | 0~+2 |
| 12~15 | 0~+1 | 20~25 | 0~+0.8 | 150~200 | 0~+2.5 |
| >15 | 0~+1.2 | 25~30 | 0~+1 | 200~250 | 0~+3 |
| | 30~40 | 0~+1.5 | 250~300 | 0~+4 |
| | 40~50 | 0~+2 | 300~350 | 0~+5 |
| | 50~80 | 0~+3 | 350~450 | 0~+8 |
| | >80 | 0~+5 | >450 | 0~+10 |
| 1,The deformation amount of the plane of ordinary specifications is
no more than 0.3mm, and that of the side is no more than 0.5mm |
| 2,Thickness <2MM, width BBB 0 20MM, lateral deformation less
than or equal to 1MM |
Applications
Carbide plate is a highly efficient and green material, which
features qualities of stainless steel: Corrosion resistance,
oxidation resistance, wear resistance, bonding proof and acid-base
resistance; And ensures its good strength, toughness, bending and
stretching, impact resistance.
Tungsten carbide strip is used for woodworking cast iron cutting
tool. It can be used in many field such as woodworking, machining
of refractory alloys, stainless steel, high manganese steel, for
processing cast iron, non-ferrous metal and aluminum section bar,
etc
