Safety Rubber Boat Dock Bumpers High Transportation Efficiency Customized Size

Inflatable Marine Fender 0.5m x 1.0m Ship Berthing Bumper Yacht Fender

pneumatic rubber fender

By development of shipping , the risk of two ships when berthing at sea also increased, especially when the weather changes, there's wind and waves. Using pneumatic fenders as side buffer of the ship, not only make heavy berthing becomes easy, but also improve the efficiency of the transportation operations.

The advantages of pneumatic rubber fender

Choose reinforce synthetic-tire-cord layers

No mold vulcanization and attach surrounding molding process

High energy absorption and low reaction force

Good adaptability to tilt in contact

Floating on the surface of the water, ship swaying can apply

Structure characteristics of the pneumatic rubber fender

LuHang Pneumatic Rubber Fenders made of an outer rubber, reinforcement synthetic-tyre-cord layer, and inner rubber, vulcanized firmly.

1]. the outer rubbers are used to protect the cord layers and inner rubber from abrasion and other external forces. This rubber compound have sufficient tensile and tear resistance strength to withstand anticipated weather conditions and severe usage.

2]. the reinforced synthetic tyre cord layers strong enough to maintain the internal air pressure of the fender.

3]. the inner rubber layer seals the pressed air inside the fender.

4]. fenders equipped with safety valve for releasing excess internal pressure when the fenders are over-compressed accidentally.

Fender assembly for the end of metal, by inside and outside the two flanges with bolts, nut clamping, center is a valve, its structure is similar to automobile tire valve.

Qingdao Luhang is a professional manufacturer of multi-purpose marine equipment including ship launching and landing airbags, pneumatic rubber fenders, EVA foam filled fender, marine buoys in deep and shallow seas etc. Through many years’ development and accumulation, we have developed to a new high-tech enterprise.

Initially established as Qingdao Luhang Marine Airbag Factory in 1988 and changed to Qingdao Luhang Marine Airbags and Fenders Co.,Ltd in 2011, Qingdao Luhang had been devoted itself to developing and manufacturing marine airbags and marine fenders for more than 2 decades.

The factory area is 56,000m² with building area of  21,000m². The company has registered capital of USD 3 million and fixed asset of USD1.2 billion. We have a full line of production equipment: rubber mixing machine, rubber roller machine, the China biggest vulcanization tanks, the biggest Press Inspection Machine, EVA foam processing machine, Foam shaping machines and SPUA spraying machine.

Through these years' development, we have full range of marine airbags and marine fenders:

Ship Launching Airbags for ship launching and docking in shipyards

Marine Salvage Airbags for salvaging sinked vessels or refloating objects from under water

Other Airbags for special usage

Pneumatic Rubber Marine Fenders for ships and docks berthing

Foam Filled Marine Fenders for ship and docks berthing

Fixed Dock Rubber Fenders for docks and wharfs

Marine Buoys

From the begginning we have been focusing on technological innovation. With a team of experienced technicans and engineers, we have developed some high tech marine products and got some petents. We have been approved as a supplier of Navy products. 

Quality is our life line. We provide service of “three guarantees” (returning, repairing and replacing) on all our products in case of any defects due to the problems of material,manufacturing, performance under conditions of normal operation and maintenance.