Floating Ship Rubber Fender Synthetic Tyre Cord Layer With Safety Valve

Ship Berthing Pneumatic Rubber Fenders 2.5m x 4.0m 50Kpa Marine Fender

Pneumatic rubber fenders consists of an out rubber, reinforced synthetic-tyre-cord layer, and inner rubber layer, vulcanized firmly.

● The out rubber are used to protect the cord layers and inner rubber layer from abrasion and other external forces. This rubber compound have sufficient tensile and tear resistance strength to withstand anticipated weather conditions and severe usage.

● The reinforcement synthetic-tyre-cord layer strong enough to maintain the internal air pressure of the fender

● The inner rubber layer seals the pressurized air inside the fender

● Fenders equipped with safety valve for releasing excess internal pressure when the fenders are over-compressed accidentally.

The fender can be protected by tire net and can be used without tire net as well.

Fender with tire net: Fender body is wrapped with a tire net.It can protect the fender body and lengthen the life of the fender.

The tires are specially treated to have a good looking. The net has chain tire net,rope tire net, steel wire tire net,chain tire net with rubber sleeves.

Testing and inspection for pneumatic rubber fenders shall be based on indicated below:

● Material test of rubber — Conducted in accordance with the Physical properties of inner and outer rubber required by ISO 17357:2014
● Dimensional inspection — shall be inspected at the initial internal pressure. Tolerance: +10%, -5%.
● Air-leakage test — shall be conducted at initial pressure for more than 30 min
● Hydrostatic-pressure test — shall be performed for 10 min at the hydrostatic pressure shown in “test pressure at 0% deflection”. Maximum temporary elongation: 10%

Our company:

We started carrying out <Qingdao Luhang Marine Airbag and Fender Factory Standard Lifting and Weight Loading Airbag > and from July 1^st, 2004, we started carrying out <Qingdao Luhang Marine Airbag and Fender Factory Standard of Pneumatic Rubber Fender>The performance of our products exceeds China standards and Industry Standards.

Initially established as Qingdao Luhang Marine Airbag Factory in 1988 and changed to Qingdao Luhang Marine Airbags and Fenders Co.,Ltd in 2011, Qingdao Luhang had been devoted itself to developing and manufacturing marine airbags and marine fenders for more than 2 decades.

The factory area is 56,000m² with building area of  21,000m². The company has registered capital of USD 3 million and fixed asset of USD1.2 billion. We have a full line of production equipment: rubber mixing machine, rubber roller machine, the China biggest vulcanization tanks, the biggest Press Inspection Machine, EVA foam processing machine, Foam shaping machines and SPUA spraying machine.

Through these years' development, we have full range of marine airbags and marine fenders:

Ship Launching Airbags for ship launching and docking in shipyards

Marine Salvage Airbags for salvaging sinked vessels or refloating objects from under water

Other Airbags for special usage

Pneumatic Rubber Marine Fenders for ships and docks berthing

Foam Filled Marine Fenders for ship and docks berthing

Fixed Dock Rubber Fenders for docks and wharfs

Marine Buoys

From the begginning we have been focusing on technological innovation. With a team of experienced technicans and engineers, we have developed some high tech marine products and got some petents. We have been approved as a supplier of Navy products. 

Quality is our life line. We provide service of “three guarantees” (returning, repairing and replacing) on all our products in case of any defects due to the problems of material,manufacturing, performance under conditions of normal operation and maintenance.