1308Ton series thermosetting injection molding machinery
Specification:
| | | GS1308HS |
A | B | C | D |
INJECTION UNIT | Screw Diameter | mm | 65 | 70 | 75 | 80 |
Screw L/D Ratio | L/D | 21.5 | 20 | 18.7 | 17.5 |
Shot Size(Theoretical) | cm3 | 1068 | 1239 | 1423 | 1619 |
Injection Weight | g | 972 | 1127 | 1295 | 1473 |
Injection Rate | g/s | 292 | 339 | 389 | 443 |
Plasticizing Capacity | g/s | 38.2 | 44.9 | 51.4 | 58.7 |
Injection Pressure | Mpa | 213 | 184 | 160 | 141 |
Screw Speed | rpm | 0-185 |
CLAMPING UNIT | Clamp Tonnage | KN | 3800 |
Toggle Stroke | mm | 700 |
Space Between Tie Bars | mm | 730*730 |
Max.Mould Height | mm | 730 |
Min.Mould Height | mm | 280 |
Ejector Stroke | mm | 180 |
Ejector Tonnage | KN | 110 |
Ejector Number | piece | 13 |
OTHERS | Max.Pump Pressure | Mpa | 17.5 |
Pump motor Power | KW | 37 |
Heater Power | KW | 24.85 |
Machine Dimension(L*W*H) | m | 7.36 x 1.96 x 2.15 |
Machine Weight | t | 15 |
Hopper Capacity | Kg | 50 |
Oil Tank Capacity | L | 750 |
Product details
1 LCD computer control with big display screen
2 Hydraulic proportional valve
3 Generous space for fitting large moulds
4 Large opening stroke
5 Two positon transducers to control clamping and injection
6 Differential area high speed clamping
7 centralized lubrication system
8 All hydraulic components and seals are offered by famous
international manufacturers
9 Mechanical safety interlock
10 Electrical safety interlock
11 Oil return filter
Features
Using high-performance servo power controlling system;
Control system responds faster,higher sensitivity and
reproducibility,good stability,anti-interference ability,low power
consumption,the closed-loop control;
Sleek,strong,reflecting the high-speed injection,streamlined design
style;
Maintenance is simple,low maintenance cost and long servise life;
Overall execution GB22530-2008”Rubber plastic injection molding
machine safety requirements”standard(safety,reliability),fully meet
the technical requirements of exporting European countries.
GSHS-Servo Energy Saving series
GS-HS plastic injection machine of oil-electric compound system
control series is the product newly developed by Guangsu Company
with feature of economic benefits,energy saving,high response and
low noise.
Structure principle during actual working status,the system
directly feedbacks the pressure-flow rate singal through exit
pressure sensor of oil pump and cycloscope to the high speed servo
driver.The servo driver gives out electric signal to servo driving
motor and oil pump,allowing of corresponding change to pressure and
flow rate,therefore,theclosed clrcuit control of pressure and flow
rate is realized.
Shanghai GS(GuangSu) Machinery Manufacture Co.,Ltd
AddNo.888,Kungang Rd, Songjiang Sci.& Tech. Park, Shanghai,China
Tel +8621-5785 0726; 5785 0727
Fax +8621-5785 0725
E-mail; sales@shguangsu.com
We all do best try to make products perfect!
