B Flute Semi Automatically Corrugated Cardboard Production Line
1.Corrugated cardboard production line brief introduction
Make craftpaper coil to corrugated paper board sheets , it is the
first step to make corrugated carton box .
This line is semi auto control , suitable for newer who want to
open fatocy to make corrugated paperboard or corugated carton box .
Price is good . We can also do fully automatically design , speed
is fast but price is higher , suitable for the factory who has
output quantitiy requirements
2. Whole production line equipment and its function
| Item | Machine name | Description |
| 1 | ZJ-F electric shaftless mill roll stand machine | To hold the craft paper 1600mm |
| 2 | SF-280 vacuum single facer machine | Make craft paper to 2 ply corrugated paperboard |
| 3 | heavy model sheet cutter machine | Cut corrugated board to the size you want |
| 4 | Sheet pasting machine 1400mm | 1) Make 3 ply corrugated board from 2ply 2) Make 5 ply corrugated board by gluing 2ply and 3 ply together |
| 5 | Paperboard pressing machine 2700*1400 | Press the formed corrugated paperboard to stick well |
| 6 | 1600mm Thin blade slitter | 1) Slit the paper (can make the corrugated board edge side neat 2) Make horizontal Creasing on corrugated board |
Note :Rewinder function is for your reference
3.How to operate the corrugated single facer machine ?
1.Tension the base paper and adjust the tension at any time
according to the change of the diameter of the base paper.
2.After the production is completed, first reset the rubber roller,
turn off the induced draft fan, turn off the heat source, and open
the air valve to adjust the main motor to low speed.
3.Clean the rubberized roller and the rubber disc to remove the
paper dust and carbonized glue on each roller and the sludge on the
preheater. Clean the site and fill in the equipment operation
record. After the corrugating roller temperature is lowered, stop
it and cut off the power.
4.Pictures for B Flute Semi Automatically Corrugated Cardboard Production Line
