• Used in the lightning protection zones concept at boundary
LPZ0B-LPZ1.
• For protecting low-voltage consumer's installations against
indirect lightning discharges.
• Protect electrical and electronic equipment against transients,
originating from lightning, switching of transformers, lighting,
and motors.
50 Ka Surge Protection Devices Advantage:
• Unique designing, patent technology.
• High discharge capacity.
• Low residual voltage.
• DIN rail mountable and ease of installation.
• Quick thermal response self-protected design.
• Our quality is same as dehnguard surge arrester and hakel surge
arrester.
• Harga lebih murah surge arrester.
How to connect a surge arrester:
• Installed at the entrance point of the building, in the main
distribution board of this installation.
• It should be used as part of lightning protection systems i.e.
when lightning rods or meshed cages are installed.
• Must install SPD strictly according to the wiring diagram
provided.
• Better to under the guidance of professional electrician.
• Green tab, normal work status, Red tab, failure status, need to
be replaced Rapidly.
• Install a direct cable connection from the protective device to
the PEN rail, parallel to the connection via the mounting plate.
