Branson CJ20 Converter Replacement for Branson 2000 Series Plastic
Welding Machine
Description:
Ultrasonic Converters and Ultrasonic Transducers are one in the
same. There is one Ultrasonic OEM, Dukane Corporation, that uses
the term Transducer. All of the other ultrasonic OEM manufactures
such as Branson, Sonics and Materials, Rinco, Telesonics and
Herrmann refer to these as Converters or Konverters.
ultrasonic transducer is an energy conversion device whose function
is to convert the input electrical power into mechanical power (ie,
ultrasonic waves) and then pass it out, while it consumes a small
amount of power (less than 10%). Therefore, the most important
consideration for using ultrasonic transducers is the matching with
the input and output terminals, followed by the mechanical mounting
and mating dimensions. There are many types of ultrasonic machinery
on the market, and customers must provide accurate and reliable
indicators to ensure that the ultrasonic transducer products
provided by the company can be matched with your company's
ultrasonic machines to achieve the best performance.
Specifications:
| Model | QR-BCJ20 |
| Frequency | 20 khz |
| Output power | 3300 watt |
| Joint bolt | 1/2-20UNF |
| Ceramic disc Diameter | 50mm |
| Qty of ceramic discs | 4pcs |
| Capacitance | 18-20nf |
| Amplitude | 10 um |
| Application | Plastic welding machine |
Problems that can arise when using ultrasonic transducers:
Common problems in use are wafer cracking, weakness, overload,
electrode pad ignition, electrode chip cracking, heat generation,
leakage, and wafer misalignment.
The reasons for such problems can be classified into three
categories. One is that the customer's drive power or mold and
assembly problems, the second is that our transducers and horns
have problems, the third is that both products have no problem, but
do not match.
1. our ultrasonic transducer and horn have problems
This will happen, but the possibility of discovery is relatively
small. Our company specializes in producing all kinds of high-power
ultrasonic transducers. The quality of all products of the horn is
at a high level in China. At the same time, we have ISO9000 quality
certification system and strict process and inspection. The quality
of our ultrasonic transducer products is guaranteed. The pass rate
of our factory products is 100%.
2. the customer's drive power or mold has a problem
We recommend that customers actively find the cause or communicate
with our technical staff to improve as soon as possible.
3. the products of both parties have no problem, but they do not
match.
This is the most common, that is, the customer's drive power is
good, the ultrasonic transducer is also good, the assembly is
normal, but the parts do not match. The main parameter causing the
mismatch is the frequency and capacitance of the ultrasonic
transducer. In response to this situation, the solution is to
adjust the matching parameters of the driver's power supply to suit
our ultrasonic transducers. The second method is to carefully study
the various chassis and the original transducers. Parameters, in
summary, as long as you can provide accurate parameter
requirements, we can guarantee to provide you with the right
transducer.
Branson CJ20 Converter Replacement for Branson 2000 Series Plastic
Welding Machine
