Decorative Elevator Metal Mesh, Hard Curtain Screen For Elevator
Cab Walls
Overseas warehouse services, double clearing tax, door-to-door
service,
mainly for the United States, Australia and Europe. Other areas are
pending development.
1.pattern design support according to the application
2. frame design support according to the installation
3. surface treatments support , include PVDF, PVD, Spraying.
4. supply install accessories, include screw, wall anchor, track,
bolt and others
5.Material: stainless steel, copper, bronze, brass, aluminum,
aluminum alloy, etc.
6.Weave type: plain weave, twill weave, dutch weave, plain dutch
weave, twill dutch weave, unique woven method, etc.
specification of Elevator Metal Mesh
_______________________________________________________________
| Material | Stainless Steel | Opening Area | 0% |
| Warp Diameter | 1.3mm | Mesh Thickness | 3.5mm |
| Warp Pitch | 8.5mm | Surface | clean &free oil |
| Weft Diameter | 3.5mm | Max High | 6 meters |
| Weft Pitch | 5.5mm | Max Wide | 3 meters |
| Weight | 14.5kgs/square meters | Application | Elevator Cab Walls |
description of Elevator Metal Mesh
_______________________________________________________________
Decorative elevator metal mesh is hard mesh, it is make with
crimped flat wire and round rod wire. but the weave type is
different from
plain weave, it is called tabby weave , linen weave or taffeta
weave, the warp wireand weft wire are aligned so they form a simple
criss-cross pattern. Each weft thread crosses the warp threads by
going over one, then under the next, and so on. so the elevator
mesh
is very strong and hard, the mesh pattern is very tightness.
Application of decorative metal mesh
elevator cab wall
The pattern of the net is like a diamond, which reflects the color
of the light and is suitable for high-end clubs.High mesh density,
not easy
to deform, waterproof and fireproof, easy to clean, high hardness
of the mesh surface, not easy to damage
how to install elevator metal mesh
———————————————————————————————————————
1. Dry hanging type is to fix the keel on the base wall first, and
connect the thermal insulation decorative board with the keel
through metal
joints or special anchors. The joint between the joints can be
sealed by extruded board, benzene board or rock wool external wall
insulation
system. filling.
2, fully bonded type is more suitable for interior wall insulation
projects. In this way, during the installation process of the
external thermal
insulation system, the thermal insulation decorative integrated
board and the base wall are only connected by a point-bonding or
full-adhesive
bonding method, which is called a fully bonded type. The craft
method should be determined according to the design requirements of
the
specific construction. The joints should be glued with special
joint mortar or other materials.
3. The combination of the anchor and anchor is mainly based on the
construction requirements. The external thermal insulation system
of the
thermal insulation decorative board is combined with the bonding
and anchoring to fix the thermal insulation decorative board on the
base wall.
Combined with fully bonded and dry hanging, it is widely used in
engineering.
images of Elevator Metal Mesh
________________________________________________________________
Features of Elevator Cab Mesh, Architectural Decorative metal mesh
· Superior Break-Through Strength
· Fireproof - Does Not Absorb Oil or Other Flammable Liquids
· Easy to Install - Can Be Spliced at Job Site
· Economical - Light Weight Reduces and Simplifies Structural
Requirements and Installation
