No Pollution Chrome Powder Coat , Smooth Texture Glow In The Dark Powder Coat

glow in the dark powder coating use for car,for example wheel and other parts,

Hsinda glow in dark powder coating using a special powder formula design, automatically in the dark light. Glow in dark powder first absorb all kinds of light and heat, converted into light energy storage, and then automatically in the dark light, and does not contain radioactive elements, and unlimited number of cycles.

Powder coating is a new type of 100% solid powder coating which does not contain solvents. With no solvent, no pollution, energy and resources saving, recycling, environmental protection, higher performance, low health risk to workforce, economical advantages etc.

Most powder coating is used by electrostatic spraying on metal surface, and then cure in oven, eventually form a solid layer.

♦ Powder coatings are based on Resin,Pigments,Curing Agents,Additives.

♦ Resin(including Epoxy, polyester, hybrid)giving the basic performance to the coating.

♦ Pigments, Providing the colour and effects, such as metallic or hammer.

♦ Curing Agents, reacts with the resin to form a continuous protective film.

♦ Additives, can be used to promote variations in the performance or surface effects.

♦ Epoxy powder coating: offer the best corrosion protection.

♦ Polyester powder coating: offer the highest exterior stability and performance.

♦ Our products applied to indoor and outdoor.

♦ Our products with SGS,Tuv, Rohs, ISO Certificate.

Applications of Product

Product detail

The powder coatings production process:

1. The polymer granules are mixed with hardener, pigments and other powder ingredients in a mixer.
2. The mixture is heated in an extruder.
3. The extruded mixture is rolled flat, cooled and broken into small chips.
4. The chips are milled and sieved to make a fine powder.