Elongation and tensile strength tester for Vertical Enameling Machine GB/T4074.3-2008/IEC60851-3

Performance Characteristics of Product
Executive standard: GB/T4074.3-2008/IEC60851-3; Inspection standard: JB/T4279.3-2008
Applicable to metal wires with pulling strength ≤3000N;
Test process would be automatically completed and, after user inputting wire size of samples to be measured, the instrument would automatically calculate tensile strength;
Application of matured advanced human-computer interface would provide a hint for test operating procedure and display test results of elongation, pulling strength and tensile strength;
Two test modes are available: Micro-fine wire and medium & large wire;
50N-3000N sensors can be switched over arbitrarily;
Automatic outrange protection for instrument;
The application of software facilitates instrument’s on-line operation and control as well as data analysis and comparison, and allows for display of stress-strain curve chart of 15 samples in different colors;
Automatically calculate the average of each test result of less than fifteen samples;
Number and save test results and corresponding curves automatically in chronological order;
Report of test results can be generated and printed out;
Instrument is provided with sensor self-calibration function and equipped with standard weight for calibration;
Servo motor and high precision ball screw is used;
Clamps are designed on the basis of characteristics of wires and can be conveniently loaded and unloaded with samples;
All test data can be automatically transmitted to upper computer, and be saved and analyzed by DMS-15 quality inspection data management system for enameled winding wire.

Major Technical Parameters

Standard configuration:
Microwire:
One 50N and 500N sensor for each;
One 20N standard weight;
One SC-5E software CD;
Medium and large wires:
One 500N and 3000N sensor for each;
One SC-5E software CD;
Sensors available: 100N, 200N, 1000N and 2000N
Optional Model: SC-5D elongation and tensile strength tester (desktop)

Facts and figures

PRO-NEWLEAD including two branches ,one is RBO to produce drawing,bunching and coiling, second in Guanzhong to produce enameling,metal bobbin and spare parts.

More than 30 years of top-quality technology for the wire and cable industry

one of the world’s leading manufacturers of wire-drawing , annealing, galvanic electroplating, bunching, take-up, rewinding, coiling and enameling of wire made of non-ferrous metals. machinery for the stranding, coiling and take-up of insulated data cables and special cables, automotive cables and power cables; the development, planning and turnkey delivery of fully-fitted cable factories; global service.

NEWLEAD has played a major role in the EXPORT of the wire and cable industry throughout its existence. And goal service engineers to do commissioning for our clients.We develop, build and plan innovative technologies at the heart of the wire ＆cableindustry. Competence, fairness and reliability are just some of the values that make the difference for customers in more than 30 different countries
Facts and figures about NEWLEAD
Core industries:
Wire industry and cable industry with a focus on the automotive, aviation and aerospace, electronics, telecommunications and transport industries
Core business:
Manufacture of lines and machinery for the drawing, annealing, galvanic electroplating, bunching, take-up, rewinding, coiling and enameling of wire made of non-ferrous metals; machinery for the stranding, coiling and take-up of insulated data cables and special cables, automotive cables and power cables; the development, planning and turnkey delivery of fully-fitted cable factories; global service.
Turnover 2015/2016: USD 2000000.00
Number of employees: 120
Number of trainees: 13
Number of employees plant 1: 80
Number of employees plant 2: 30

Number of employees plant 3: 10
Locations:Suzhou,Changzhou,Wuxi
Export ratio: > 35%