Generator Automatic Transfer Switch 1250 Amps For 750KVA Diesel
Generator
General Introduction
Automatic transfer switch equipment (ATSE) is such a new product
that integrates switch and logic control to truly realize the
mechatronics; it applies at the distribution device of rated
insulation voltage up to 1000V and rated frequency of 50Hz and
rated voltage up to 660V and conventional heat current up to 3200A.
to automatically transfer between the master power and the backup
one in the power supply system or the two load devices and perform
the secure isolation, wide used at the important occasions, e.g.
hospital,marketplace,bank,highrise building,coal mine,communication
department,iron mine,expressway, airport, product line and military
facilities where the power interruption is taboo.
ATS Function
1. Full automation: i.e. self-operatin&self-reset. When the
backup power supply presents the power interruption, the switch
equipment would automatically connect with the backup power supply;
however, when the duty power supply recovers, the switch equipment
would automatically connect with the duty one.
2. Compulsively setting "0": In case of the emergency or
maintenance, it is to start the compulsive "0" self-lock button
switch equipment to automatically stand at the position "0" to cut
the dual power supply.
3. Remote control: i.e. control by the remote operation. Starting
the position "I" of button to make the duty power supply work and,
starting the position "II”to make the backup power supply work.
Finished ATS
