13DLA Aluminium Wire Drawing Machine , Al Wire Drawing Equipment With Continuous Annealing

HXE-13DLA Aluminium rod breakdown machine with Annealing , Double spoolers

I. Quick description

HXE-13DLA Aluminium rod breakdown machine with annealing is used to draw and anneal single bare aluminium wire from 9.5mm to 1.7mm-4.2mm.

II. Parameter

1. Inlet wire diameter 9.5mm

2. Outlet wire diameter 1.7mm-4.2mm

3. Actual drawing & annealing speed 800m/min

4. Number of Dies 13

5. Drum speed ratio 1.25

6. Capstan Iron cast, With Tungsten Carbide surface, 650mm, 4 pieces

7. Machine frame Welded

8. Main motor AC 75KW, Fix speed motor 22KW

9. Spooler motor AC 11KW

10. Inverter Inovance Brand

11. Speed adjust by Inverters

12. Transmission by Gear&Triangle Belts

13. Cantilever type pay-off shelf

14. Free rod type traversing

15. Power source customized

16. Annealing voltage 60V

17. Annealing current 3000A

18. Annealing power 180KVA

19. Annealing type D.C. Three section annealing

20. Annealing speed control by Inverters , auto tracking the drawing speed

III. Component

IV. Operation details

1. Open the power switch of the electrical cabinet.

2. Use the Foot-switch while make the wire through the dies.

3. After make the wire through some dies, should open the lubrication oil to make sure no wire break.

4. Make the wire through the take-up part well arranged, then close the door.

5. According to the user`s require to set the Length-counter, adjust the balance arm.

6. If wire breaks, will stop automatically, and the Fault Indicator light will open.

After connect the wire, press the Fault Reset button(Yellow button) and the On button (Green button), to run the machine again.

7. Press Emergency Stop button(Red button) to shut down the machine immediately.

After solve, press the button again to run the machine.

8. After set the Length-counter, the machine will stop automatically when reach the length set.

After change the Spool, please press the Length Reset button(Yellow button) and the Spool Reset button(Yellow button) to run the machine again.

9. After the machine stop(no running at all), then switch the Pump switch to stop the lubrication.

V. Advantage and after-sale service

After-sale service

Warranty: after shipping, machine part one year, electrical parts six months

Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.

1. Due to wrong operation while shipping.

2. Due to Buyer`s wrong preparation that may cause damage to the machine.

3. Due to Buyer`s wrong operation that may cause damage to the machine.

4. Not in the consuming part list.

5. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.

6. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.

7. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.

      Suzhou Hengxie Machinery Co., Ltd was established in 2005, a total professional in drawing machine field, specialized in copper and aluminium wire drawing machines. Located in Suzhou City, very close to Shanghai, we share a convenient transportation and the most successful working environment.

Our 6,700 square meters of land allows producing a wide range of equipment, developing and researching new products. We always strive to introduce the latest international techniques to update our products.

With management concept of “Excellent quality, Reasonable prices, Superior services”, our hope is to not only meet our customers` expectations but to exceed them.

Here are the machines we have: Copper&Aluminium Rod Breakdown machine, Large and intermediate wire drawing machine with online annealer, Intermediate wire drawing machine, Intermediate wire drawing machine with online annealer, Fine wire drawing machine, Fine wire drawing machine with online annealer, Customized fine wire drawing machine with annealer, Super fine wire drawing machine. As long as we talk, we can always meet your detail requirements.

Our market includes both domestic and overseas. Such as Bangladesh, Egypt, Iran, Malaysia, Syria, Algeria, Kenya, Turkey, South Africa, Latin America and so on.

With the concept of “Stable quality and mutual development”, Hengxie welcome all customers from the world to create a sincere cooperation and win-win benefit in the future.