100M Fiber Optical Media Converter 1310 & 1550nm Singlemode WDM
40Km used in FTTH
Product Description
1. 10/100m fiber optic media converter can convert Optical-Electric Ethernet signals between 10/100M UTP interface (TX) and
100M optical fiber interface (FX).
2. It can extend traditional 10/100M fast Ethernet to the distance
of 120km through optical fiber link. It possesses stable
performance and good quality by adopting latest IC packages from
USA and Taiwan. 6 Group LED indicated lights could fully monitor
the working conditions of Converters. It is easy for end-users to
observe network operation. this series external power supply
Converters could be used alone, or inserted to 14 slots Converters
Rack supplied by natywish. suitable for the use of Network Centre.
Main Feature:
1. Auto negotiation function allows UTP port to auto select 10M or
100M, and Full Duplex or Half Duplex.
2. UTP port supports MDI/MDI-X auto crossover.
3. Indicator function of link fault (LFP): When optical fiber or UTP is at fault, the converter could stop all the link. (Optional)
4. Multiple Optical Transceiver could be chosen: SC, ST or FC,
singlemode / multimode
5. Supporting 1600 bytes packet for management
6. Converter working mode could be chosen: Store and forward switch mode, Modified cut-through switch mode, or
Converter mode.
7. Internal Circuit of prevented thunder could greatly reduce
damage of the converter caused by thunderbolt induction.
8. Internal or External switching power: for users to choose.
Technical Spec:
1. Operating standards:IEEE802.3u,10/100Base-TX and 100Base-FX;
2. Data buffer: Built-in 128Kbyte RAM.
3. Connectors: UTP Connector: RJ-45, 10/100Mbps; Fiber Connector: ST/SC/FC, 100Mbps
4. Cable:
UTP: Cat. 5 (the max distance up to 100m)
Fiber ( Multimode): 50/125, 62.5/125μm(the max distance up to 2km or 5km)
Fiber ( Singlemode): 8.3/125, 8.7/125, 9/125, 10/125μm(the max distance up to 20 -120km)
5. Flow Control
Full Duplex: Supporting standard IEEE802.3x
Half Duplex: back pressure
6. LED: Power, FX SD, FX Link/Act, TX 100, TX FDX, TX Link/Act.
7. Power Requirement: AC 110 ~ 240V to DC 5V; DC48V to DC 5V.
8. Ambient Temperature: 0 ~ 50°C
9. Storage Temperature: - 40 ~ 70 °C
10. Humidity: 5 ~ 90%
11. Dimensions: Internal power: 30×110×140mm
External power: 26×70×93mm
Specifications
| Parameter | Specifications |
| Access mode | 10/100Mbps |
| Standard | IEEE802.3 10Base-T Ethernet, IEEE802.3u,100Base-TX/FX Fast
Ethernet, IEEE802.3x Flow control,IEEE802.1q VLAN,IEEE802.1p
QoS,IEEE802.1d Spanning Tree |
| Wavelength | 850nm/1310nm/1550nm |
| Transmission distance | Dual-fiber multi-mode: 2 km; Dual-fiber single mode: 20/40/60/80/100/120 km Single fiber single mode: 20/40/60/80//100/120 km Category-5 twisted pairs: 100m |
| Port | One RJ45 por: For connecting STP/UTP category-5 twisted pairs One optical port: Multi-mode, dual fiber: SC or ST (50, 62.5/125μm) Single mode, dual fiber: SC or FC (9/125μm) Single mode Single fiber: SC or FC (9/125μm) |
| Conversion method | store-and-forward/cut-through |
| MAC address table | 1K |
| Buffer space | 1Mbit |
| Flow control | Full duplex: flow control; Half duplex: back pressure |
| Delay | Store-and-forward: 9.6μs cut-through: 0.9μs |
| BER | <19-9 |
| MTBF | 100,000 hours |
| LED indicator | PWR, TXLink/ACT, FDX, FEF, FXLink/ACT, SPD |
| Power supply | DC5V 1A (external), AC220 15A/DC-48(internal) |
| Power consumption | <5W |
| Operating temperature | -10~55℃ |
| Operating humidity | 5%~90% |
| Storage temperature | -40~70℃ |
| Storage humidity | 5% ~ 90% non-condensing |
| Dimensions | 71mm (W) * 94mm (D) * 26 mm (H) (external power supply) 140 mm (W) * 110 mm (D) * 40 mm (H) (internal power supply) 25 mm (W) * 152 mm (D) * 128 mm (H) (slide-in type) |
| Weight | 0.45kgs(external), 0.8kgs(internal) |
Optical parameters
MM 2Km | Fiber: 62.5/125, 50/125, 100/140μm |
| Output power: >﹣18dBm |
| Receiving sensitivity: <﹣31dBm |
| Distance: 0～2km or 0～5km |
| Connector: SC(standard)／FC(optional) /ST(optional) |
| Type: dual-fiber |
| Wavelength: 850nm/1300nm/1310nm |
| Fiber:9/125, 8.3/125, 8.7/125 or 10/125μm |
SM 20km | Distance: 0～20km |
| Output power:-13～﹣8dBm |
| Receiving sensitivity: <﹣34dBm |
| Connector: SC(standard)／FC(optional) /ST(optional) |
| Type: single-fiber / dual-fiber |
| Wavelength: 1310nm/1550nm(single-fiber),1310nm(dual-fiber) |
SM 40km | Distance: 0～40km |
| Output power:﹣11～﹣6dBm |
| Receiving sensitivity: < ﹣34dBm |
| Connector: SC(standard)／FC(optional) /ST(optional) |
| Type: single-fiber / dual-fiber |
| Wavelength :1310nm/1550nm(single-fiber),1310nm(dual-fiber) |
SM 60km | Distance: 0～60km (when less than 15km, use attenuator) |
| Output power:﹣5～0dBm |
| Receiving sensitivity: < ﹣36dBm |
| Connector: SC(standard)／FC(optional) /ST(optional) |
| Type: single-fiber / dual-fiber |
| Wavelength: 1310nm/1550nm(single-fiber),1310nm(dual-fiber) |
SM 80km | Distance: 0～80km (when less than 15km, use attenuator) |
| Output power:﹣8～-3dBm |
| Receiving sensitivity: < ﹣36dBm |
| Connector: SC(standard)／FC(optional) /ST(optional) |
| Type: single-fiber / dual-fiber |
| Wavelength: 1310nm/1550nm(single-fiber),1550nm(dual-fiber) |
SM 120km | Distance: 0～120km (when less than 15km, use attenuator) |
| Output power:﹣3～5dBm |
| Receiving sensitivity: < ﹣39dBm |
| Connector: SC(standard)／FC(optional) /ST(optional) |
| Type: dual-fiber |
| Wavelength: 1550nm |
