FTTB 4 ports RJ45 EPON MDU 1000Mbps GEPON 4GE ONU Support network
management
The NTW-E17400H is an industry-leading remote multi dwellingunit (MDU) , which, on
a passive optical network(PON), facilitates power supply for Fiber
To The Building (FTTB)installation in corridors, providing
broadband network access forfamilies and small to medium
enterprises by using category-5 cablesrouted in the building.
ONU (Optical Network Unit) is the user equipment of EPON.
It can end the operation from OLT (Optical Line Terminal) by PON
and provide all kinds of broadband services cooperated with OLT.
ONU is configured and managed remotely by OLT.
NTW-E17400H ONU is cost effective customer device with eight
10/100/1000Mbps ethernet interfaces,special designed for FTTH
(Fiber to the House) and FTTB (Fiber to the Building).It supplies
1G bandwidth to business users and residential users.
Product Feature:
1. Adopt point to multi point network topology, effectively collect
and gather users' dispersed Ethernet Services,provides
4*10/100/1000M RJ45 fast ethernet ports,smooth interconnection with
existing networks
2. Dynamic bandwidth allocation mechanism enables all users to
share the bandwidth of 1Gbps more reasonably,achieve reliable QoS
guarantee,ensure the quality of service of different services in
the same network.
3. Support IGMP multicast and make effective use of broadband.
4. Support port isolation.
5. Support Ethernet loop detection, automatic judging devices
whether there is an Ethernet loop blocking on the network.When the
loop is disappearing, it can automatically recover.
6. Support multicast VLAN.
7. Support remote loop back, remote diagnosis network state.
8. The rich OAM function design includes configuration, alarm,
performance monitoring, fault isolation and security management. It
not only provides remote management through OLT, but also supports
local console management.
9. Support the authority certification test of the Ministry of
public security.
Technical Parameter
Model
| NTW-E17400H |
User side interface
| 4*10/100M BASE-T fast ethernet RJ45 ports (self adaption). |
| PON port |
Uplink and downlink symmetric,transmission rate:1Gbps.
Network coverage radius : 20km.
Optical interface type:SC/PC.
Highly sensitive optical receiver: ≧-30dBm.
Luminous power:2-7dBm .
Security: ONU authentication mechanism.
|
Standards to be followed
|
IEEE 802.3ah.
(YD/T 1475-2006).
IEEE 802.1D, Spanning Tree.
IEEE 802.1Q, VLAN.
IEEE 802.1w, RSTP.
Ethernet – II, Ethernet-SNAP.
|
| VLAN |
Port base VLAN.
IEEE 802.1Q VLAN
|
| Quality of service(QoS) |
Backpressure flow control (half duplex).
IEEE 802.3x,flow control (full duplex).
Prevent Head Of Line mechanism.
IEEE p802.1p, CoS
4 transmission queues per port mapped 8 priorities for 802.1p
WR, SP and FIFO queuing scheduling algorithms.
Line rate .
|
| Reliability |
UDLD(Single directional link detection protocol to prevent survival
tree loop)
Support Dying-Gasp function.
|
| Network security |
IEEE 802.1x:Port Based Network Access Control.Support local and
remote authentication, EAP end or transmission.
CHAP,EAP authentication.
Limit the maximum number of users per port.
Port protection.
Message storm control.
|
| Management configuration |
CLI, Web, SNMP, TELNET multiple management methods.
Software upgrades can be carried out through TFTP and FTP.
Local or server syslog log system log.
ping, trace route network testing tools.
|
| Dimension |
125*175*28mm.
|
Installation : plug and play.
|
| Heat dissipation |
For a long time (24 hours)to use, the heating of the equipment will
not cause the deterioration of the performance and the deformation
and damage of the device.
|
| Environment requirement |
Working environment:-55℃～75℃；5%～95% non-condensing.
|
Storage environment:-60℃～80℃；5%～95% non-condensing.
|
| Power supply |
Power adapter type: switch power adapter.
|
Input voltage rating:110V～240V,50/60Hz.
|
The range of input voltage fluctuation: International + 10%.
|
Fuse: install an inrecoverable temperature insurance
(or temperature resistance) at the input end.
|
Power consumption : ≦ 3W.
|
Certification requirements: domestic CCC certification,
international CE certification or customer designated
certification.
|
Order Information
Model
| Description |
NTW-E17400H
|
Industrial 4 ports ONU EPON
|
