ZP6108 High Speed Directional Pulse Hole Metallizing PCB Lab
Equipment
1. Introduction
Structure
★1. Use high speed pulse power source for plating, supply uniform
good quality coating.
★2. Fully ABS engineer plastic machine body and inner
groove, with antiseptic, thermo stability, technology flow is
beautiful.
★3. Environment protection black hole technology flow application,
No pollution, it can direct discharge.
★4. Cathode oscillation technology, prevent , concentration
gradient, add hole inner liquid flowability.
Technical specification:
★1. With 4 groove structure, with acid-washing, soak conducting
resin, activate, electroplating function.
★2. Use transparent flip function, it is easy to observe and
storage.
★3. Maximum board: 400×400mm, it can electroplating
5 boards at the same time.
★4. Minimum hole diameter: 0.3mm
★5.Maximum thickness ratio 5:1
★6.Output frequency: 0-2kHz adjustable(it can change as DC power)
★7.Output current: forward direction 0-5A, reverse 0-20A
adjustable.
★8.Pulse width: use pulse directional power, forward direction
0-100%, reverse pulse 0 to 100% single adjustable.
9.constantvoltage constant current: current or voltage is constant,
with self adjust function, 2 directional current real time display
function.
★10.time setting: work time preset function, time remaining display
and automatic power off alarm.
★11.LCD:6 inch full color LCD, display all work specification.
12.Circuit protection: with short circuit, open circuit function,
supply alarm signal.
